EN Standard
EN 187105:2002 |
Single mode optical cable (duct/direct buried installation) |
EN 2083:2001 |
Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard |
Specification for conduit systems for cable management. Particular requirements. Rigid conduit systems |
|
EN 50086-2-2:1996 |
Specification for conduit systems for cable management. Particular requirements. Pliable conduit systems |
EN 50086-2-3:1996 |
Specification for conduit systems for cable management. Particular requirements. Flexible conduit systems |
EN 50086-2-4:1994 |
Specification for conduit systems for cable management. Particular requirements. Conduit systems buried underground |
EN 50117-1:2002 |
Coaxial cables. Generic specification |
EN 50117-2-1:2002 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 1000 MHz |
EN 50117-2-2:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks |
EN 50117-2-3:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks |
EN 50117-2-4:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks |
EN 50117-2-5:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks |
EN 50117-3:1996 |
Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables |
EN 50117-3-1:2002 |
Coaxial cables. Sectional specifications for cables used in telecom applications. Miniaturized cables used in digital communication systems |
EN 50117-4:1996 |
Coaxial cables used in cabled distribution networks. Sectional specification for distribution and trunk cables |
EN 50117-5:1997 |
Coaxial cables used in cabled distribution networks. Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
EN 50117-6:1997 |
Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 |
EN 50143:1999 |
Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
EN 50146:2000 |
Cable ties for electrical installations |
EN 50214:1998 |
Flexible cables for lifts |
EN 50262:1999 |
Cable glands for electrical installations |
EN 50264-1:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Standard wall. General requirements |
EN 50264-2:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Standard wall. Single core cables |
EN 50264-3:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Standard wall. Multicore cables |
EN 50266-1:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus |
EN 50266-2-1:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category A F/R |
EN 50266-2-2:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category A |
EN 50266-2-3:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category B |
EN 50266-2-4:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category C |
EN 50266-2-5:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Small cables. Category D |
EN 50267-1:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Apparatus |
EN 50267-2-1:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of the amount of halogen acid gas |
EN 50267-2-2:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. |
EN 50267-2-3:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. |
EN 50268-1:2000 |
Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Apparatus |
EN 50268-2:2000 |
Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Procedure |