GB cable standards

 

China GB cable standards

EN |  BS |  DIN |  IEC |  IEEE  |  NF  |  ANSI |  JIS  |  GB |  ISO |
Cable standard Code Name
DL 413-1991(2005) ()
DL 453-1991(2005) ()
DL 508-1993(2005) ()
DL 509-1993(2005) ()
DL/T 1070-2007 Qualification test methods and requirements for tree retardant performance of medium voltage XLPE power cables
DL/T 401-2002 ()
DL/T 413-2006 ()
DL/T 5161.5-2002 ()
DL/T 5182-2004 ()
DL/T 5221-2005 ()
DL/T 5228-2005 ()
DL/T 802.1-2007 Technical requirements for electric cable conduits Part 1:General
DL/T 802.2-2007 Technical requirements for electric cable conduits Part 2:Cable conduits of fiberglass reinforced plastics
DL/T 802.3-2007 Technical requirements for electric cable conduits Part 3:Cable conduits of chlorinated polyvinyl chloride and unplasticized polyvinyl chloride
DL/T 802.4-2007 Technical requirements for electric cable conduits Part 4:Double wall corrugated cable conduits of chlorinated polyvinyl chloride and unplasticized polyvinyl chloride
DL/T 802.5-2007 Technical requirements for electric cable conduits Part 5:Cable conduits of fiber-cement
DL/T 802.6-2007 Technical requirements for electric cable conduits Part 6:Cable conduits of socket type precast concrete
DL/T 849.1-2004 ()
DL/T 849.2-2004 ()
DL/T 849.3-2004 ()
GB 10151-1988 Medical X-ray equipment--Specification for high voltage cable plug and socket connections
GB 12527-1990 Aerial insulated cables of rated voltages up to and including 1 kV
GB 12528.1-1990 Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV--General
GB 12528.11-2003 Insulated cables(wires) for railway vehicles of rated voltages up to and including 3 kV--Amendent 1:Cross-linked polyolefin insulated cables(wires) for railway vehicles
GB 12972.1-1991 Flexible rubber-sheathed cables formining purposes--Part 1:General
GB 12972.10-1991 Flexible rubber-sheathed cablesfor mining purposes--Part 10:Miner’s cap lamp cords
GB 12972.2-1991 Flexible rubber-sheathed cables for mining purposes--Part 2:Flexible coalcutter cables for rated voltages up to 0.66/1.14kV
GB 12972.3-1991 Flexible rubber-sheathed cables for mining purposes--Part 3:Trailing coalcutter cables with monitoring core and semiconducting screens for rated voltage of 0.66/1.14kV
GB 12972.4-1991 Flexible rubber-sheathed cables for mining purposes--Part 4:Flexible coalcutter cables with indivdual metallic screens for rated voltage of 0.66/1.14kV
GB 12972.5-1991 Flexible rubber-sheathed cables for mining purposes--Part 5:Flexible cables for rated voltage up to 0.66/1.14kV
GB 12972.6-1991 Flexible rubber-sheathed cables for mining purposes--Part 6:Flexible cables with monitoringcore and semiconducting screens for rated voltage of 3.6/6kV
GB 12972.7-1991 Flexible rubber-sheathed cables for mining purposes--Part 7:Flexible cables with screens for rated voltage of 3.6/6kV
GB 12972.8-1991 Flexible rubber-sheathed cables for mining purposes--Part 8:Flexible drill cables for rated voltage of 0.3/0.5kV
GB 12972.9-1991 Flexible rubber-sheathed cables for mining purposes--Part 9:Flexible light-duty cables
GB 13836-2000 Cabled distributionsystems for television and sound signals--Part 2:Electromagnetic compatibility of equipment
GB 14049-1993 Aerial insulated cables with rated voltages of 10kV and 35kV
GB 14316-1993 PVC insulated ribbon cable with a pitch of 1.27mm suitable for insulation displacement termination
GB 15065-1994 Black polyethylene compounds for wire and cable
GB 15579.12-1998 Safety requirements for arc welding equipment--Part 12:Coupling devices for welding cables
GB 16487.9-2005 Environmental protection control standard for imported solid wastes as raw materials -- Waste wires and cables
GB 16787-1997 Measurements and limits of radiation of cabled distribution systems primarily intended for sound and television signals operating between 30MHz and 1GHz
GB 16788-1997 Measurements and limits of immunity of cabled distribution systems primarily intended for sound and television signals operating between 30MHz and 1GHz
GB 17502-1998 Specifications for submarine cable and pipeline route investigation
GB 5013.1-1997 Rubber insulated cables of rated voltages up to and including 450/750V--Part 1:General requirements
GB 5013.2-1997 Rubber insulated cables of rated voltages up to and including 450/750V--Part 2:Test methods
GB 5013.3-1997 Rubber insulated cables of rated voltages up to and including 450/750V--Part 3:Heatresistant silicone insulated cables
GB 5013.4-1997 Rubber insulated cables of rated voltages up to and including 450/750V--Part 4:Cords and flexible cables
GB 5013.5-1997 Rubber insulated cables of rated voltages up to and including 450/750V--Part 5:Lift cables
GB 5013.6-1997 Rubber insulated cables of rated voltages up to and including 450/750V--Part 6:Arc welding cables
GB 5013.7-1997 Rubber insulated cables of rated voltages up to and including 450/750V--Part 7:Heat resistant ethylene-vinyl acetate rubber insulated cables
GB 5023.1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 1:General requirements
GB 5023.2-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 2:Test methods
GB 5023.3-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 3:Non-sheathed cables for fixed wiring
GB 5023.4-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 4:Sheathed cables for fixed wiring
GB 5023.5-1997 Polyvinylchloride insulated cables of rated voltages up to and including 450/750V--Part 5:Flexible cables (cords)
GB 5023.7-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 7:Flexible cables screened and unscreened with two or more conductors
GB 5579-1985 High-voltage cable plug and socket connections for medical X-ray equipment
GB 6995.1-1986 Markings for electric cables and wires--Part 1:General requirements
GB 6995.2-1986 Markings for electric cables and wires--Part 2:Standard colours
GB 6995.3-1986 Markings for electric cables and wires--Part 3:Identifications of cables and wires
GB 6995.4-1986 Markings for electric cables and wires--Part 4:Identifications of insulated conductors of cables and wires for electrical appliances and equipments
GB 6995.5-1986 Markings for electric cables and wires--Part 5:Identifications of insulated cores of power cables
GB 7251.5-1998 Low-voltage switchgear and controlgear assemblies--Part 5:Particular requirements for assemblies intended to be installed outdoors in public places--Cable distribution cabinets (CDCs)for power distribution in networks
GB 7969-2003 Electric power cable paper
GB 7970-1999 Communication cable paper
GB 7971-1987 Semiconducting electric cable paper
GB 9326.1-1988 Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--General
GB 9326.2-1988 Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--Oil filled paper insulated cables
GB 9326.3-1988 Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--Sealing ends
GB 9326.4-1988 Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--Joints
GB 9326.5-1988 Oil-filled paper-insulated cables and accessories for alternating voltages up to and inclnding 330kV--Pressure tanks
GB 9330.1-1988 Plastic insulated control cables--General
GB 9330.2-1988 Plastic insulated controlcables--Polyvinyl chloride insulated and sheathed control cables
GB 9331.1-1988 Shipboard power cables and wires of rated voltages up to and including 0.6/1 kV--General
GB/T 11017.1-2002 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110kV--Part 1:Test methods and requirements
GB/T 11017.2-2002 Power cables with cross-linked polyethylene insulation andtheir accessories for rated voltage of 110kV--Part 2:Power cables with cross-linked polyethylene insulation for rated voltage of 110kV
GB/T 11017.3-2002 Power cables with cross-linked polyethylene insulationand their accessories for rated voltage of 110kV--Part 3:Accessories for power cables with cross-linked polyethylene insulation for rated voltage of 110kV
GB/T 11091-2005 Copper strips for cables
GB/T 11313.24-2001 Radio-frequency connectors--Part 24:Radio-frequency coaxial connectors with screwcoupling,typically for use in 75Ω cable distribution systems(Type F)
GB/T 11318.1-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 1:Generic specifications
GB/T 11318.10-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 10:Generic specifications for splitter and subscriber’s trap
GB/T 11318.11-1996 Equipments and components used in cabled distribution systemsprimarily intended for television and sound signals--Part 11:Generic specifications for attenuator, equalizer, filter and trap
GB/T 11318.12-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 12:Generic specifications for systemoutlets
GB/T 11318.14-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 14:Generic specifications for arrester
GB/T 11318.3-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 3:Generic specifications for TV modulator
GB/T 11318.4-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 4:Generic specifications for channel processor
GB/T 11318.6-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 6:Generic specifications for combiners
GB/T 11318.7-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 7:Generic specifications for amplifier
GB/T 11318.8-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 8:Generic specifications for trunk amplifiers
GB/T 11318.9-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 9:Generic specifications of equipments for power supply
GB/T 11322.1-1997 Radio-frequency cables--Part 0:Guide to the design of detail specifications--Section 1--Coaxial cables
GB/T 11323-1989 General requirements and tests for single-unit coaxial cables for use in cabled distribution systems
GB/T 11326.1-1989 High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--General rules
GB/T 11326.2-1989 High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--Unfilled cables with copper conductors
GB/T 11326.4-1989 High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--Filled cables with copper conductors
GB/T 11327.1-1999 Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath--Part 1:General test and measuring methods
GB/T 11327.2-1999 Low-frequency telecommunication cable and wires with PVC insulation and PVC sheath--Part 2:Cables in pairs,triples,quads and quintuples for inside installation
GB/T 11327.3-1999 Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath--Part 3:Terminating cables in pairs
GB/T 12269-1990 Generic specification for radio-frequency cables
GB/T 12666.1-1990 Test method on electric wires or cables under fire conditions--Part 1:General
GB/T 12666.3-1990 Test method on electric wires or cables under fire conditions--Part 3:Test on a single horizontal insulated wire or cable
GB/T 12666.4-1990 Test method on electric wires or cables under fire conditions--Part 4:Test on a single slanting insulated wire or cable
GB/T 12706.1-2002 Power cables with extruded insulation and their accessories for rated voltages from 1kV(Um=1.2kV)up to 35kV(Um=40.5kV)--Part 1:Cables for rated voltages of 1kV(Um=1.2kV) and 3kV(Um=3.6kV)
GB/T 12706.2-2002 Power cables with extruded insulation and their accessories for rated voltages from 1kV(Um=1.2kV)up to 35kV(Um=40.5kV)--Part 2:Cables for rated voltages from 6kV (Um=7.2kV) up to 30kV (Um=36kV)
GB/T 12706.3-2002 Power cables with extruded insulation and their accessories for rated voltages from 1kV(Um=1.2kV)up to 35kV(Um=40.5kV)--Part 3:Cables for rated voltage of 35kV(Um=40.5kV)
GB/T 12706.4-2002 Power cables with extruded insulation and their accessories for rated voltages from 1kV(Um=1.2kV)up to 35kV(Um=40.5kV)--Part 4:Test requirements on accessories for cables with rated voltages from 6kV(Um=7.2kV)up to 35kV(Um=40.5kV)
GB/T 12826-1991 The calculation guide of the drum (reeling) cable’s current rating
GB/T 12976.1-1991 Copperor aluminium conductor paper-insulated power cables with rated voltages upto 35kV--Part 1:General
GB/T 12976.2-1991 Copper or aluminium conductor paper-insulated power cableswith rated voltages up to 35kV--Part 2:Non-draining oil impregnated paper-insulated matal-sheathed power cables
GB/T 12976.3-1991 Copper or aluminium conductor paper-insulated power cables with rated voltages up to 35kV--Part 3:Resin oil impregneted paper-insulated metal-sheathed power cables
GB/T 13029.1-2003 Electrical installations in ships--Choice and installation of cables for low-voltage power systems
GB/T 13029.2-1991 Choice and installation of shipboard flexiblecoaxial cables
GB/T 13029.3-1991 Choice and installation of shipboard telecommunication cables and radio frequency cables
GB/T 13033.1-2007 ()
GB/T 13033.2-2007 ()
GB/T 13137-1991 Specification for 12-channel telephone carrier terminal equipment used on the symmetric pains of 2.6/9.5 mm coaxial cable
GB/T 13425-1992 Measurement for 24-channel submarine coaxial cable carrier telephone equipment
GB/T 13429-1992 Measurement methods for 120-channel submarine coaxial cable carrier telephone equipment
GB/T 13430-1992 Performance requirements for 24-channel submarine coaxial cable carrier telephone equipment
GB/T 13431-1992 Performance requirements for 120-channel submarine coaxial cable carrier telephone equipment
GB/T 13849.1-1993 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 1:General
GB/T 13849.2-1993 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 2:Unfilled,moisture barrier polyethylene sheathed local telecommunication cables with copper conductors and solid or cellular polyolefin insulation
GB/T 13849.3-1993 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 3:Filled,moisture barrier polyethylene sheathed local telecommunication cables with copper conductors and solid or cellular polyolefin insulation
GB/T 13849.4-1993 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 4:Unfilled,moisture barrier polyethylene sheathed local telecommunication cables with copper conductors,solid polyolefin insulation and integral suspension strand
GB/T 13849.5-1993 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 5:Moisture barrier polyethylene sheathed and seperated(inner-screened)local telecommunication cables with copper conductors and solid or cellular polyolefin insulation
GB/T 14130-1993 Performance requirements for digital sections of metallic cables used in telecommunication network
GB/T 14131-1993 Performance requirements for digital linesystems on coaxial pair cables used in telecommunication network
GB/T 14132-1993 Performance requirements for digital linesystems on symmetric pair cables used in telecommunication network
GB/T 14134-1993 Local telecommunication cables with paper insulation and lead sheath
GB/T 14135-1993 High frequency symmetrical telecommunication cables with copper conductor star quads and lead sheath
GB/T 14315-1993 Compression type terminal lugs and ferrules for power cables with copper or aluminium conductors
GB/T 14864-1993 Radio frequency cables with solid polyethylene dielectric
GB/T 15285-1994 Sectional specification for leaky coaxial cables
GB/T 15396-1994 Dimensions for hexagonal and square crimping-die cavities, indentors, gauges,outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors
GB/T 15866-1995 Radio frequency and coaxial cable assemblies--Part 2-1:Sectional specification for flexible coaxial cable assemblies
GB/T 15867-1995 Radio frequency and coaxial cable assemblies--Part 4:Sectional specification for semi-rigid coaxial cable assemblies
GB/T 15875-1995 General specification for leaky cable radiocommunication system
GB/T 15891-1995 Radio frequency cables--Part 4:Specification for superscreened cables--Section 1:General require-ments and test methods
GB/T 16531-1996 Radio frequency and coaxial cable assemblies--Part 3:Sectional specification for semi-flexible coaxial cable assemblies
GB/T 17389-1998 Recommended practice for application of ESP submersible cable systems
GB/T 17556-1998 Sheathing materials for shipboard power andtelecommunication cables
GB/T 17557-1998 Insulating materials for shipboard power cables
GB/T 17562.8-2002 Rectangular connectors for frequencies below 3MHz--Part 8:Detail specification for connectors,four-signal contacts and earthing contacts for cable screen
GB/T 17650.1-1998 Test on gases evolved during combustion of materials from cables--Part 1:Determination of the amount of halogen acid gas
GB/T 17650.2-1998 Test on gases evolved during combustion of materials from cables--Part 2:Determination of degree of acidity of gases by measuring pH and conductivity
GB/T 17651.1-1998 Measurement of smoke density of cables burning under defined conditions--Part 1:Test apparatus
GB/T 17651.2-1998 Measurement of smoke density of cables burning under defined conditions--Part 2:Test procedure and requirements
GB/T 17737.1-2000 Radio-frequency cables--Part 1:Generic specification--General,definitions,requirements and test methods
GB/T 17737.2-2000 Radio-frequency cables--Part 2:Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene(PTFE) insulation
GB/T 17737.3-2001 Radio frequency cables--Part 3:Sectional specification for coaxial cables for local area networks
GB/T 17738.1-1999 Radio-frequency and coaxial cable assemblies--Part 1:Generic specification--General requirementsand test methods
GB/T 17746-1999 Petroleum liquids and gases--Fidelity and security of dynamic measurement--Cabled transmission of electric and/or electronic pulsed data
GB/T 17755-1999 Single-and three-core shipboard power cables with extruded solid insulation for rated voltages 6kV,10kV and 15kV
GB/T 18015.1-2007 ()
GB/T 18015.11-2007 ()
GB/T 18015.2-2007 ()
GB/T 18015.21-2007 ()
GB/T 18015.22-2007 ()
GB/T 18015.3-2007 ()
GB/T 18015.31-2007 ()
GB/T 18015.32-2007 ()
GB/T 18015.4-2007 ()
GB/T 18015.41-2007 ()
GB/T 18015.42-2007 ()
GB/T 18015.5-2007 ()
GB/T 18015.6-2007 ()
GB/T 18050-2000 Tests of electric submersible pump cable systems
GB/T 18212-2000 Calculation of maximum external diameter of cables for indoor installations
GB/T 18213-2000 Guide to the calculation of resistance of plain and coated copper conductor of low-frequency cables and wires
GB/T 18380.1-2001 Tests on electric cables under fire conditions--Part 1:Test on a single vertical insulated wire or cable
GB/T 18380.2-2001 Tests on electric cables under fire conditions--Part 2:Test on a singlesmall vertical insulated copper wire or cable
GB/T 18380.3-2001 Testson electric cables under fire conditions--Part 3:Test on bunched wires or cables
GB/T 18404-2001 Mineral insulated thermocouple cables and thermocouples
GB/T 18616-2002 Corrugated flexible metallic hose assmeblies for the protection of electrical cables in explosive atomspheres
GB/T 18889-2002 Electric cables-test methods for accessories for power cables with rated voltages from 6kV(Um=7.2kV)up to 35kV(Um=40.5kV)
GB/T 19215.1-2003 Cable trunking and ducting systems for electrical installations--Part 1: General requirements
GB/T 19215.2-2003 Cable trunking and ducting systems for electrical installations--Part 2: Particular requirements--Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings
GB/T 19216.11-2003 Tests for electric cables under fire conditions--Circuit integrity--Part 11: Apparatus--Fire alone at a flame temperature of at least 750℃
GB/T 19216.21-2003 Tests for electric cables under fire conditions--Circuit integrity--Part 21: Procedures and requirements--Cables of rated voltage up to and including 0.6/1.0kV
GB/T 19216.23-2003 Tests for electric cables under fire conditions--Circuit integrity--Part 23:Procedures and requirements--Electric data cables
GB/T 19216.25-2003 Tests for electric cables under fire conditions--Circuit integrity--Part 25: Procedures and requirements--Optical fibre cables
GB/T 19637-2005 Electrical accessories-cable reels for household and similar purposes
GB/T 19666-2005 Flame retardant and fire resistant wires and cables General
GB/T 19849-2005 Seamless copper-tube for cable
GB/T 20637-2006 Electrical installations in ships - Shipboard power cables - General construction and test requirements
GB/T 20779.2-2007 ()
GB/T 20841-2007 ()
GB/T 21021-2007 ()
GB/T 21204.1-2007 ()
GB/T 2697-1987 Jute yarns and threads for cables--Technical requirements and grading stipulation
GB/T 2900.10-2001 Electrotechnical vocabulary--Electric cables
GB/T 2900.40-1985 Electrotechnical terminology--Machineryand equipment for electric wires and cables
GB/T 2951.1-1997 Common test methods for insulating and sheathing materials of electric cables--Part 1:Methods for general application--Section one:Measurement of thickness and overall dimensions--Tests for determining the mechanical properties
GB/T 2951.10-1997 Common test methods for insulating and sheathing materials of electric cables--Part 5:Methods specific to filling compounds--Section one:Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive components--Per
GB/T 2951.2-1997 Common test methods for insulating and sheathing materials of electric cables--Part 1:Methods for general application--Section two:Thermal ageing methods
GB/T 2951.3-1997 Common test methods for insulating and sheathing materials of electric cables--Part 1:Methods for general application--Section three:Methods for determining the density--Water absorption tests--Shrinkage test
GB/T 2951.4-1997 Common test methods for insulating and sheathing materials of electric cables--Part 1:Methods for general application--Section four:Test at low temperature
GB/T 2951.5-1997 Common test methods for insulating and sheathing materials of electric cables--Part 2:Methods specific to elastomericcompounds--Section one:Ozone resistance test--Hot set test--Mineral oil immersion test
GB/T 2951.6-1997 Common test methods for insulating and sheathing materials of electric cables--Part 3:Methods specific to PVC compounds--Section one:Pressure test at high temperature--Test for resistance to cracking
GB/T 2951.7-1997 Common test methods for insulating and sheathing materials of electric cables--Part 3:Methods specific to PVC compounds--Section two:Loss of mass test--Thermal stability test
GB/T 2951.8-1997 Common test methods for insulating andsheathing materials of electric cables--Part 4:Methods specific to polyethyleneand polypropylene compounds--Section one:Resistance to environmental stress cracking--Wrapping test after thermal ageing in air--Measurem
GB/T 2951.9-1997 Common test methods for insulating and sheathing materials of electric cables--Part 4:Methods specific to polyethylene and polypropylene compounds--Section two:Elongation at break after pre-conditioning--Wrapping test after pre-conditioning--Wrapping tes
GB/T 2952.1-1989 Protective coverings for electric cables--General
GB/T 2952.2-1989 Protective coverings for electric cables--General protective coverings for cables with metallic sheath
GB/T 2952.3-1989 Protective coverings for electric cables--General protective coverings for cables with non-metallic sheath
GB/T 2952.4-1989 Protective coverings for electric cables--Specific protective coverings for oil-filled cables with lead sheath
GB/T 3048.1-2007 ()
GB/T 3048.10-2007 ()
GB/T 3048.11-2007 ()
GB/T 3048.12-2007 ()
GB/T 3048.13-2007 ()
GB/T 3048.14-2007 ()
GB/T 3048.16-2007 ()
GB/T 3048.2-2007 ()
GB/T 3048.3-2007 ()
GB/T 3048.4-2007 ()
GB/T 3048.5-2007 ()
GB/T 3048.7-2007 ()
GB/T 3048.8-2007 ()
GB/T 3048.9-2007 ()
GB/T 3082-1984 Galvanized low carbon steel wire for armouring cables
GB/T 3333-1999 Cable paper--Determination of electrical strength at power frequence
GB/T 3334-1999 Method of test for dissipation factor (tgδ) of cable paper at power frequence (Schering bridge method)
GB/T 3956-1997 Conductors of insulated cables
GB/T 4011-1983 1.2/4.4mm composite coaxial cable for telecommunication use
GB/T 4012-1983 2.6/9.5mm composite coaxial cable for telecommunication use
GB/T 5013.8-2006 Rubber insulated cables of rated voltages up to and including 450/750V Part 8: Cords for applications requiring high flexibility
GB/T 5023.6-2006 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V Part 6: Lift cables and cables for flexible connections
GB/T 5054.3-2006 Road vehicles - Multicore connecting cables -Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
GB/T 5441.1-1985 Test methods for communication cable--General
GB/T 5441.10-1985 Test methods for communication cable--Measurement of actual length of coaxial pair--Sine wave method
GB/T 5441.2-1985 Test methods for communication cable--Capacitance test--Bridge method
GB/T 5441.3-1985 Test methods for communication cable--Capacitance unbalance test
GB/T 5441.4-1985 Test methods for communication cable--Impedance and impedance irregularities test of coaxial pair--Pulse method
GB/T 5441.5-1985 Test methods for communication cable--Characteristic impedance test of coaxial pair--Resonance method
GB/T 5441.6-1985 Test methods for communication cable--Crosstalk attenuation test--Comparison method
GB/T 5441.7-1985 Test methods for communication cable--Attenuation coefficient test--Open and short circuit method
GB/T 5441.8-1985 Test methods for communication cable--Test for frequency characteristic of attenuation coefficient of coaxial pair--Comparison method
GB/T 5441.9-1985 Test methods for communication cable--Test for ideal screening factor measured at power frequency
GB/T 6510-1996 Cabled distribution systems primarily intended for television and sound signals
GB/T 7393-1987 Basic size of outlet of cable distribution systems intended for sound and television signals
GB/T 7594.1-1987 Rubber insulation and sheath of electric cables and wires--Part 1:General
GB/T 7594.10-1987 Rubber insulation and sheath of electric cables and wires--Part 10:Ordinary duty flame-retardant rubber sheath 90℃
GB/T 7594.11-1987 Rubber insulation and sheath of electric cables and wires--Part 11:Rubber insulation or sheath 180℃
GB/T 7594.2-1987 Rubber insulationand sheath of electric cables and wires--Part 2:Rubber insulation 65℃
GB/T 7594.3-1987 Rubber insulationand sheath of electric cables and wires--Part 3:Rubber insulation 70℃
GB/T 7594.4-1987 Rubber insulationand sheath of electric cables and wires--Part 4:Ordinary duty rubber sheath 65℃
GB/T 7594.5-1987 Rubber insulation and sheath of electric cables and wires--Part 5:Ordinary duty flame-retardant rubber sheath 65℃
GB/T 7594.6-1987 Rubber insulationand sheath of electric cables and wires--Part 6:Heavy duty rubber sheath 65℃
GB/T 7594.7-1987 Rubber insulation and sheath of electric cables and wires--Part 7:Heavy duty flame-retardant rubber sheath 65℃
GB/T 7594.8-1987 Rubber insulationand sheath of electric cables and wires--Part 8:Rubber sheath 90℃
GB/T 7594.9-1987 Rubber insulation and sheath of electric cables and wires--Part 9:Ordinary duty flame-retardant rubber sheath 85℃
GB/T 8815-2002 Plasticized polyvinyl chloride (PVC) compounds for wire and cable
GB/T 9025-1988 Cabled distribution systems primarily intended for sound and television signals operating between30 MHz and 1 GHz--Electrical and mechanical matching values
GB/T 9327.1-1988 Test methods for compression and mechanical connectors for conductors of power cables--General
GB/T 9327.2-1988 Test methods for compression and mechanical connectors for conducters of power cables--Testmethods for measuremcnt of D.C. resistance of connectors
GB/T 9327.3-1988 Test methods for compression and mechanical connectors for conductors of power cables--Methodof short-circuit testing
GB/T 9327.4-1988 Test methods for compression and mechanical connectors for conductors of power cables--Method of heat cycle testing
GB/T 9327.5-1988 Test methods for compression and mechanical connectors for conductors of power cables--Methodof tensile strength testing
GB/T 9332.1-1988 Shipboard control cables--General
GB/T 9333.1-1988 Shipboard cables with symmetrical conductors--General
GB/T 9334.1-1988 Shipboard radio-frequency cables--General
GB/Z 18890.1-2002 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220kV(Um=252kV)--Part 1:Power cable systems--Cables with cross-linked polyethylene insulation and their accessories for ratedvoltage of 220kV(Um=252kV
GB/Z 18890.2-2002 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220kV(Um=252kV)--Part 2:Power cables with cross-linked polyethylene insulation for rated voltage of 220kV(Um=252kV)
GB/Z 18890.3-2002 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220kV(Um=252kV)--Part 3:Accessories for power cables with cross-linked polyethylene insulation for rated voltage of 220kV(Um=252kV)
HD 402 S2-1984 Standard colours for thermoplastic materials used for the insulation for low-frequency cables and wires
JB 8144.1-1995 ()
JB/T 10113-2002 ()
JB/T 10181.1-2000 ()
JB/T 10181.2-2000 ()
JB/T 10181.3-2000 ()
JB/T 10181.4-2000 ()
JB/T 10181.5-2000 ()
JB/T 10181.6-2000 ()
JB/T 10216-2000 ()
JB/T 10259-2001 ()
JB/T 10260-2001 ()
JB/T 10261-2001 ()
JB/T 10358-2002 ()
JB/T 10435-2004 ()
JB/T 10436-2004 ()
JB/T 10437-2004 ()
JB/T 10438-2004 ()
JB/T 10491.1-2004 ()
JB/T 10491.2-2004 ()
JB/T 10491.3-2004 ()
JB/T 10491.4-2004 ()
JB/T 10636-2006 Copper-conductor extruded plastic insulated cables with pre-fabricated branches for rated voltage of 0.6/1kV(Um=1.2kV)
JB/T 10696.1-2007 ()
JB/T 10696.2-2007 ()
JB/T 10696.3-2007 ()
JB/T 10696.4-2007 ()
JB/T 10696.5-2007 ()
JB/T 10696.6-2007 ()
JB/T 10696.7-2007 ()
JB/T 10696.8-2007 ()
JB/T 10707-2007 ()
JB/T 10738-2007 Semi-conductive shielding compound for power cables of rated voltages up to and including 35kV
JB/T 10739-2007 Separable connectors for extruded insulation power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV(Um=40.5kV)
JB/T 10740.1-2007 Cold shrinkable accessories for extruded insualtion power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV(Um=40.5kV)-Part 1:Terminations
JB/T 10740.2-2007 Cold shrinkable accessories for extruded insualtion power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV(Um=40.5kV)-Part 2:Straight joints
JB/T 3302-1999 ()
JB/T 4015.1-1999 ()
JB/T 4015.2-1999 ()
JB/T 4015.3-1999 ()
JB/T 4015.4-1999 ()
JB/T 4015.5-1999 ()
JB/T 4015.6-1999 ()
JB/T 4032.1-1999 ()
JB/T 4032.2-1999 ()
JB/T 4032.3-1999 ()
JB/T 4032.4-1999 ()
JB/T 4033.1-1999 ()
JB/T 4033.2-1999 ()
JB/T 4033.3-1999 ()
JB/T 4033.4-1999 ()
JB/T 4033.5-1999 ()
JB/T 4262-1992 ()
JB/T 5268.1-1991 ()
JB/T 5268.2-1991 ()
JB/T 5332.1-1991 ()
JB/T 5332.2-1991 ()
JB/T 5332.3-1991 ()
JB/T 5332.4-1991 ()
JB/T 5350-1991 ()
JB/T 5814.1-1991 ()
JB/T 5814.2-1991 ()
JB/T 5814.3-1991 ()
JB/T 5814.4-1991 ()
JB/T 5814.5-1991 ()
JB/T 5814.6-1991 ()
JB/T 5814.7-1991 ()
JB/T 5815-1991 ()
JB/T 5816-1991 ()
JB/T 5817.1-1991 ()
JB/T 5817.2-1991 ()
JB/T 5817.3-1991 ()
JB/T 5817.4-1991 ()
JB/T 5818.1-1991 ()
JB/T 5818.2-1991 ()
JB/T 5818.3-1991 ()
JB/T 5818.4-1991 ()
JB/T 5819-1991 ()
JB/T 5820-1991 ()
JB/T 5824.1-1991 ()
JB/T 5824.2-1991 ()
JB/T 5824.3-1991 ()
JB/T 5824.4-1991 ()
JB/T 5824.5-1991 ()
JB/T 6037-1992 ()
JB/T 6213.1-2006 Flexible cables and cords for winding leads of electric motors-Part 1:general
JB/T 6213.2-2006 Flexible cables and cords for winding leads of electric motors-Part2:Flexible cables and cords with maximum continuous operating temperature of 70℃
JB/T 6213.3-2006 Flexible cables and cords for winding leads of electric motors-Part3:Flexible cables and cords with maximum continuous operating temperature of 90℃
JB/T 6213.4-2006 Flexible cables and cords for winding leads of electric motors-Part4:Flexible cables and cords with maximum continuous operating temperature of 180℃
JB/T 6213.5-2006 Flexible cables and cords for winding leads of electric motors-Part5:Freon resistant cords
JB/T 6213.6-2006 Flexible cables and cords for winding leads of electric motors-Part6:Flexible cables and cords with maximum continuous operating temperature of 125℃ & 150℃
JB/T 6464-2006 Taped straight joints for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 35kV(Um=40.5kV)
JB/T 6465-2006 Porcelain bushing terminations for power cables with rated voltage of 35kV(Um=40.5kV)
JB/T 6466-2006 Porcelain bushing terminations for paper insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV)
JB/T 6467-1992 ()
JB/T 6468-2006 Taped terminations for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV)
JB/T 6488.5-1999 ()
JB/T 6743-1993 ()
JB/T 6756.1-1993 ()
JB/T 6756.10-1993 ()
JB/T 6756.2-1993 ()
JB/T 6756.3-1993 ()
JB/T 6756.4-1993 ()
JB/T 6756.5-1993 ()
JB/T 6756.6-1993 ()
JB/T 6756.7-1993 ()
JB/T 6756.8-1993 ()
JB/T 6756.9-1993 ()
JB/T 681-1999 ()
JB/T 7495-1994 ()
JB/T 7600.1-1994 ()
JB/T 7600.2-1994 ()
JB/T 7600.3-1994 ()
JB/T 7600.4-1994 ()
JB/T 7600.5-1994 ()
JB/T 7601.1-1994 ()
JB/T 7601.10-1994 ()
JB/T 7601.11-1994 ()
JB/T 7601.2-1994 ()
JB/T 7601.3-1994 ()
JB/T 7601.4-1994 ()
JB/T 7601.5-1994 ()
JB/T 7601.6-1994 ()
JB/T 7601.7-1994 ()
JB/T 7601.8-1994 ()
JB/T 7601.9-1994 ()
JB/T 7829-2006 Heat-shrinkable terminations for power cables with rated voltages from 1kV(Um=1.2kV) up to 35kV(Um=40.5kV)
JB/T 7830-2006 Heat-shrinkable straight joints for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV)
JB/T 7831-2006 Cast resin terminations for power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV)
JB/T 7832-2006 Cast resin straight joints for power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV)
JB/T 8137.1-1999 ()
JB/T 8137.2-1999 ()
JB/T 8137.3-1999 ()
JB/T 8137.4-1999 ()
JB/T 8139-1999 ()
JB/T 8140.1-1995 ()
JB/T 8140.2-1995 ()
JB/T 8140.3-1995 ()
JB/T 8140.4-1995 ()
JB/T 8141.1-1995 ()
JB/T 8141.2-1995 ()
JB/T 8141.3-1995 ()
JB/T 8141.4-1995 ()
JB/T 8142.1-1995 ()
JB/T 8142.2-1995 ()
JB/T 8143.1-1995 ()
JB/T 8143.2-1995 ()
JB/T 8143.3-1995 ()
JB/T 8143.4-1995 ()
JB/T 8144.1-1995 ()
JB/T 8144.2-1995 ()
JB/T 8144.3-1995 ()
JB/T 8145.1-1995 ()
JB/T 8145.2-1995 ()
JB/T 8145.3-1995 ()
JB/T 8205-1999 ()
JB/T 8442.1-1996 ()
JB/T 8442.2-1996 ()
JB/T 8442.3-1996 ()
JB/T 8502-1996 ()
JB/T 8503.1-2006 Premolded accessories (slip-on type) for extruded insulation power cables with rated voltages from 6kV(Um=7.2kV) up to 35kV(Um=40.5kV) Part
JB/T 8503.2-2006 Premolded accessories (slip-on type) for extruded insulation power cables with rated voltages from 6kV(Um=7.2kV) up to 35kV(Um=40.5kV) Part 2:Straight
JB/T 8640-1997 ()
JB/T 866-1999 ()
JB/T 8734.1-1998 ()
JB/T 8734.2-1998 ()
JB/T 8734.3-1998 ()
JB/T 8734.4-1998 ()
JB/T 8734.5-1998 ()
JB/T 8735.1-1998 ()
JB/T 8735.2-1998 ()
JB/T 8735.3-1998 ()
JB/T 8901-1999 ()
JB/T 8996-1999 ()
JB/T 8997.1-1999 ()
JB/T 8997.2-1999 ()
JB/T 8997.3-1999 ()
JB/T 8997.4-1999 ()
JB/T 8998-1999 ()
JC 980-2005 ()
JC/T 988-2005 ()
MT 386-1995(2005) ()
MT 429-1995(2005) ()
MT 818-1999 ()
MT 961-2005 ()
MT/T 117-2005 ()
MT/T 351.1-2005 ()
MT/T 351.2-2005 ()
MT/T 351.3-2005 ()
MT/T 351.4-2005 ()
MT/T 775-1998(2005) ()
MT/T 848.1-2000(2005) ()
MT/T 848.2-2000(2005) ()
MT/T 945-2005 ()
MT/T 946-2005 ()
MT/T 947-2005 ()
prEN 14281-2001 Plastics piping systems for buried cable ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system
QB/T 1453-2003 ()
QB/T 2462.1-1999 ()
QB/T 2479-2005 ()
QB/T 2692-2005 ()
SH/T 0001-1990(2003) ()
SY/T 10017-2005 ()
SY/T 5103-2000 ()
SY/T 5192-1991 ()
SY/T 5361-2007 Procedures for the cut-and-thread fishing operation
SY/T 5691-2006 The specification for the interpretation of wireline formation tester data
SY/T 5692-1995 ()
SY/T 6548-2003 ()
SY/T 6600-2004 ()
SY/T 6602-2004 ()
YB/T 024-1992(2005) ()
YB/T 182-2000(2006) ()
YB/T 5088-2007 ()