EN cable standards

   

EN cable standards

EN |  BS |  DIN |  IEC |  IEEE  |  NF  |  ANSI |  JIS  |  GB |  ISO |


Cable standard code Name
EN 10257-1-1998 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables
EN 10257-2-1998 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables
EN 12548-1999 Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves
EN 12613-2001 Plastics warning devices for underground cables and pipelines with visual characteristics
EN 175500-1997 Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval
EN 187105-2002 Single mode optical cable (duct/direct buried installation)
EN 2083-2001 Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard
EN 2355-1988 Aerospace series - Fork-ends, threaded, control cable in corrosion resisting steel; Dimensions and loads
EN 2591-610-2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 610: Optical elements; Effectiveness of cable attachment; Cable pulling
EN 2591-611-2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 611: Optical elements; Effectiveness of cable attachment; Cable torsion
EN 2591-612-2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression
EN 300429 V 1.2.1-1998 Digital Video Broadcasting (DVB) - Framing structure, channel coding and modulation for cable systems
EN 3475-100-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General
EN 3475-201-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination / Note: Applies only in conjunction with EN 3475-100
EN 3475-202-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass / Note: Applies only in conjunction with EN 3475-100
EN 3475-301-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Ohmic resistance per unit length / Note: Applies only in conjunction with EN 3475-100
EN 3475-302-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 302: Voltage proof test / Note: Applies only in conjunction with EN 3475-100
EN 3475-303-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance / Note: Applies only in conjunction with EN 3475-100
EN 3475-304-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance / Note: Applies only in conjunction with EN 3475-100
EN 3475-305-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance / Note: Applies only in conjunction with EN 3475-100
EN 3475-401-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing / Note: Applies only in conjunction with EN 3475-100
EN 3475-402-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination / Note: Applies only in conjunction with EN 3475-100
EN 3475-403-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking / Note: Applies only in conjunction with EN 3475-100
EN 3475-404-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock / Note: Applies only in conjunction with EN 3475-100
EN 3475-405-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature / Note: Applies only in conjunction with EN 3475-100
EN 3475-406-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test / Note: Applies only in conjunction with EN 3475-100
EN 3475-407-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 407: Flammability / Note: Applies only in conjunction with EN 3475-100
EN 3475-409-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing / Note: Applies only in conjunction with EN 3475-100
EN 3475-410-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 14
EN 3475-412-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance
EN 3475-413-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test
EN 3475-501-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic out-through / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 22
EN 3475-502-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation / Note: Applies only in conjunction with EN 3475-100
EN 3475-503-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion / Note: Applies only in conjunction with EN 3475-100
EN 3475-504-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion / Note: Applies only in conjunction with EN 3475-100
EN 3475-505-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands / Note: Applies only in conjunction with EN 3475-100
EN 3475-506-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuity / Note: Applies only in conjunction with EN 3475-100
EN 3475-507-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Strippability and adherence of insulation to the conductor / Note: Applies only in conjunction with EN 3475-100
EN 3475-508-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness
EN 3475-509-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability
EN 3475-510-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material
EN 3475-511-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion
EN 3475-512-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance
EN 3475-603-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking
EN 3475-604-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation
EN 3475-605-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test
EN 3475-701-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippability / Note: Applies only in conjunction with EN 3475-100
EN 3475-702-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability / Note: Applies only in conjunction with EN 3475-100
EN 3475-703-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturers marking / Note: Applies only in conjunction with EN 3475-100
EN 3475-704-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 704: Flexibility
EN 3475-705-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 705: Contrast measurement
EN 3475-801-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length
EN 3475-802-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance
EN 3475-803-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation
EN 3475-804-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of progagation
EN 3475-805-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance
EN 3475-806-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation
EN 3475-807-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance / Note: Applies in conjunction with EN 3475-100 (2002-02)
EN 3475-808-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk / Note: Applies in conjunction with EN 3475-100 (2002-02)
EN 3745-205-2002 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability
EN 3745-511-2002 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion
EN 50083-1-1993+A1 -1997+A2-1997 Cable networks for television signals, sound signals and interactive services - Part 1: Safety requirements
EN 50083-10-2002 Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths
EN 50083-2-2001 Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
EN 50083-3-2002 Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks
EN 50083-4-1998 Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks
EN 50083-5-2001 Cabled networks for television signals, sound signals and interactive services - Part 5: Headend equipment
EN 50083-6-1997 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
EN 50083-7-1996+A1-2000 Cable networks for television signals, sound signals and interactive services - Part 7: System performance
EN 50083-8-2002 Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks
EN 50083-9-2002 Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
EN 50085-1-1997+A1-1998 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
EN 50085-1/prA2-2002 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; Amendment A2
EN 50085-2-3-1999 Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets
EN 50086-1-1993 Conduit systems for cable management - Part 1: General requirements
EN 50086-2-1-1995 +A11-1998 Conduit systems for cable management - Part 2-1: Particular requirements for rigid conduit systems
EN 50086-2-2-1995 +A11-1998 Conduit systems for cable management - Part 2-2: Particular requirements for pliable conduit systems
EN 50086-2-3-1995 +A11-1998 Conduit systems for cable management - Part 2-3: Particular requirements for flexible conduit systems
EN 50086-2-4-1994 +A1-2001 Conduit systems for cable management - Part 2-4: Particular requirements for conduit systems buried underground
EN 50098-1-1998+A1-2002 Customer premises cabling for information technology - Part 1: ISDN basic access
EN 50098-2-1996 Customer premises cabling for information technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface
EN 50109-1-1995 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1: General requirements and tests
EN 50109-2-1-1995 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with fixed dies,sies A to E,V and W
EN 50109-2-2-1995 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with removadle and inter-changeadle dies,size A to G,Q to T,V and W
EN 50109-2-3-1995 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors
EN 50109-2-4-1995 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ
EN 50109-2-5-1995 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications
EN 50117-1-2002 Coaxial cables - Part 1: Generic specification / Note: Applies only in conjunction with EN 50290-1-1
EN 50117-2-1-2002 Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks; Indoor drop cables for systems operating at 5 MHz - 1000 MHz / Note: Applies only in conjunction with EN 50117-1
EN 50117-3-1-2002 Coaxial cables - Part 3-1: Sectional specifications for cables used in telecom applications; Miniaturized cables used in digital communication systems / Note: Applies only in conjunction with EN 50117-1
EN 50117-3-1996 Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables
EN 50117-4-1996 Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables
EN 50117-5-1997 Coaxial cables used in cabled distribution networks - Part 5: Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
EN 50117-6-1997 Coaxial cables used in cabled distribution networks - Part 6: Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
EN 50143-1997+A1-2003 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
EN 50146-2000 Cable ties for electrical installations
EN 50173-1-2002 Information technology - Generic cabling systems - Part 1: General requirements and office areas
EN 50174-1-2000 Information technology - Cabling installation - Part 1: Specification and quality assurance
EN 50174-2-2000 Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings
EN 50182-2001 Conductors for overhead lines - Round wire concentric lay stranded conductors / Note: Includes Corrigendum of July 2001
EN 50200-2000 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
EN 50214-1997 Flexible cables for lifts
EN 50249-2002 Electromagnetic locators for buried pipes and cables - Performance and safety
EN 50262-1998+A1-2001 Metric cable glands for electrical installations
EN 50264-1-2002 Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 1: General requirements
EN 50264-2-2002 Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 2: Single core cables
EN 50264-3-2002 Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 3: Multicore cables
EN 50265-1-1998 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1: Apparatus
EN 50265-2-1-1998 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - 1 kW pre-mixed flame
EN 50265-2-2-1998 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - Diffusion flame
EN 50266-1-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Apparatus
EN 50266-2-1-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Procedures; Category A F/R / Note: Includes Corrigendum of March 2002
EN 50266-2-2-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-2: Procedures; Category A / Note: Includes Corrigendum of March 2002
EN 50266-2-3-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3: Procedures - Category B / Note: Includes Corrigendum of March 2002
EN 50266-2-4-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures; Category C / Note: Includes Corrigendum of March 2002
EN 50266-2-5-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-5: Procedures; Small cables; Category D / Note: Includes Corrigendum of March 2002
EN 50267-1-1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus
EN 50267-2-1-1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas
EN 50267-2-2-1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
EN 50267-2-3-1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity Partly Supersedes HD602S1:1992
EN 50268-1-1999 Common test methods for cable under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus
EN 50268-2-1999 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure
EN 50288-1-2001 Multi-element metallic cables use in analogue and digital communication and control - Part 1: Generic specification
EN 50288-2-1-2001 Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterized up to 100 MHz; Horizontal and building backbone cables
EN 50288-2-2-2001 Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterized up to 100 MHz; Work area and patch cord cables
EN 50288-3-1-2001 Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterized up to 100 MHz; Horizontal and building backbone cables
EN 50288-3-2-2001 Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz; Work area and patch cord cables
EN 50288-4-1-2001 Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterized up to 600 MHz; Horizontal and building backbone cables
EN 50288-4-2-2001 Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterized up to 600 MHz; Work area and patch cord cables
EN 50289-1-1-2001 Communication cables - Specifications for test methods - Part 1-1: Electrical test methods; General requirements
EN 50289-1-10-2001 Communication cables - Specifications for test methods - Part 1-10: Electrical test methods; Crosstalk / Note: Applies only in conjunction with EN 50289-1-1
EN 50289-1-11-2001 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods; Characteristic impedance, input impedance, return loss / Note: Applies only in conjunction with EN 50289-1-1
EN 50289-1-2-2001 Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance
EN 50289-1-3-2001 Communication cables - Specifications for test methods - Part 1-3: Electrical test methods; Dielectric strength
EN 50289-1-4-2001 Communication cables - Specifications for test methods - Part 1-4: Electrical test methods; Insulation resistance / Note: Applies in conjunction with EN 50289-1-1
EN 50289-1-5-2001 Communication cables - Specifications for test methods - Part 1-5: Electrical test methods; Capacitance / Note: Applies in conjunction with EN 50289-1-1
EN 50289-1-6-2002 Communication cables - Specifications for test methods - Part 1-6: Electrical test methods; Electromagnetic performance / Note: Applies in conjunction with EN 50289-1-1
EN 50289-1-7-2001 Communication cables - Specifications for test methods - Part 1-7: Electrical test methods; Velocity of propagation / Note: Applies in conjunction with EN 50289-1-1
EN 50289-1-8-2001 Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation / Note: Applies in conjunction with EN 50289-1-1
EN 50289-1-9-2001 Communications cables - Specifications for test methods - Part 1-9: Electrical test methods; Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)
EN 50289-3-1-2001 Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods; General requirements
EN 50289-3-11-2001 Communication cables - Specifications for test methods - Part 3-11: Mechanical test methods; Cable cut-through resistance
EN 50289-3-12-2001 Communication cables - Specifications for test methods - Part 3-12: Mechnical test methods; Shot gun damage
EN 50289-3-13-2003 Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods; Aeolian vibration / Note: Applies in conjunction with EN 50289-3-1
EN 50289-3-15-2003 Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods; Underwater cable resistance to hydrostatic pressure / Note: Applies in conjunction with EN 50289-3-1
EN 50289-3-16-2001 Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods; Cable tensile performance
EN 50289-3-17-2002 Communication cables - Specifications for test methods - Part 3-17: Mechnical test methods; Adhesion of dielectric and sheath / Note: Applies in conjunction with EN 50289-3-1
EN 50289-3-2-2001 Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods; Tensile strength and elongation for conductor
EN 50289-3-4-2001 Communication cables - Specifications for test methods - Part 3-4: Mechanical test methods; Tensile strength, elongation and shrinkage of insulation and sheath
EN 50289-3-5-2001 Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods; Crush resistance of the cable
EN 50289-3-6-2001 Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods; Impact resistance of the cable
EN 50289-3-7-2001 Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods; Abrasion resistance of the cable sheath
EN 50289-3-8-2001 Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods; Abrasion resistance of cable sheath markings
EN 50289-3-9-2001 Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests
EN 50289-4-1-2001 Communication cables - Specifications for test methods - Part 4-1: Environmental test methods; General requirements
EN 50289-4-11-2002 Communication cables - Specifications for test methods - Part 4-11: Environmental test methods; A horizontal integrated fire test method
EN 50289-4-14-2003 Communication cables - Specifications for test methods - Part 4-14: Environmental test methods; Lightning / Note: Applies in conjunction with EN 50289-3-1
EN 50289-4-2-2001 Communication cables - Specifications for test methods - Part 4-2: Environmental test methods; Water penetration
EN 50289-4-6-2001 Communication cables - Specifications for test methods - Part 4-6: Environmental test methods; Temperature cycling
EN 50289-4-9-2001 Communication cables - Specifications for test methods - Part 4-9: Environmental test methods; Pneumatic resistance
EN 50290-2-20-2001 Communication cables - Part 2-20: Common design rules and construction; General
EN 50290-2-21-2001 Communication cables - Part 2-21: Common design rules and construction; PVC insulation compounds
EN 50290-2-22-2001 Communication cables - Part 2-22: Common design rules and construction; PVC sheating compounds
EN 50290-2-23-2001 Communication cables - Part 2-23: Common design rules and construction; PE insulation
EN 50290-2-24-2002 Communication cables - Part 2-24: Common design rules and construction; PE sheathing / Note: Applies only in conjunction with EN 50290-2-20
EN 50290-2-25-2002 Communication cables - Part 2-25: Common design rules and construction; Polypropylene insulation compounds / Note: Applies only in conjunction with EN 50290-2-20
EN 50290-2-26-2002 Communication cables - Part 2-26: Common design rules and construction; Halogen free flame retardant insulation compounds / Note: Applies only in conjunction with EN 50290-2-20
EN 50290-2-27-2002 Communication cables - Part 2-27: Common design rules and construction; Halogen free flame retardant thermoplastic sheathing compounds / Note: Applies only in conjunction with EN 50290-2-20
EN 50290-2-28-2002 Communication cables - Part 2-28: Common design rules and construction; Filling compounds for filled cables / Note: Applies only in conjunction with EN 50290-2-20
EN 50290-2-29-2002 Communication cables - Part 2-29: Common design rules and construction; Cross-linked PE insulation compounds / Note: Applies only in conjunction with EN 50290-2-20
EN 50290-2-30-2002 Communication cables - Part 2-30: Common design rules and construction; Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing / Note: Applies only in conjunction with EN 50290-2-20
EN 50290-4-1-2001 Communication cables - Part 4-1: General considerations for the use of cables; Environmental conditions and safety aspects
EN 50299-2002 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV
EN 50305-2002 Railway applications - Railway rolling stock cables having special fire performance - Test methods
EN 50306-1-2002 Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 1: General requirements
EN 50306-2-2002 Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 2: Single core cables
EN 50306-3-2002 Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed
EN 50306-4-2002 Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 4: Multicore and multipair cables standard wall sheathed
EN 50307-2002 Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables
EN 50334-2001 Marking by inscription for the identification of cores of electric cables
EN 50336-2002 Bushings for transformers and reactor cable boxes not exceeding 36 kV
EN 50340-2001 Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV / Note: Includes Corrigendum of February 2002
EN 50343-2003 Railway applications - Rolling stock - Rules for installation of cabling
EN 50355-2003 Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall; Guide to use
EN 50356-2002 Method for spark testing of cables
EN 50362-2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
EN 50368-2003 Cable cleats for electrical installations
EN 60169-23-1993 Radio-frequency connectors- part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) (IEC 60169-23:1991)
EN 60169-24-1993 Radio-frequency connectors- part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 60169-24:1991)
EN 60169-25-1993 Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN) (IEC 60169-25:1992)
EN 60230-2002 Impulse tests on cables and their accessories (IEC 60230:1966)
EN 60371-3-8-1995 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables (IEC 60371-3-8:1995 + Corrigendum 1995)
EN 60439-5-1996+A1-1998 Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks (IEC 60439-5:1996)
EN 60465-1990 Specification for unused insulating mineral oils for cables with oil ducts (IEC 60465:1988)
EN 60603-9-1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990)
EN 60702-1-2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables (IEC 60702-1:2002)
EN 60702-2-2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations (IEC 60702-2:2002)
EN 60719-1993 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V (IEC 60719:1992)
EN 60794-1-1-2002 Optical fibre cables - Part 1-1: Generic specification; General (IEC 60794-1-1:2001)
EN 60794-1-2-1999 +A-2002 Optical fibre cables - Part 1-2: General specification - Basic optical cable test procedures (IEC 60794-1-2:1999)
EN 60794-1-2/prA2-2002 Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures
EN 60794-2-10-2003 Optical fibre cables - Part 2-10: Indoor cables; Family specification for simplex and duplex cables (IEC 60794-2-10:2003) / Note: Endorsement notice
EN 60794-2-20-2003 Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables (IEC 60794-2-20:2003) / Note: Endorsement notice
EN 60794-2-2003 Optical fibre cables - Part 2: Indoor cables; Sectional specification (IEC 60794-2:2002) / Note: Endorsement notice. Applies only in conjunction with EN 60794-1-1 (2002) and EN 60794-1-2 (1999)
EN 60794-2-30-2003 Optical fibre cables - Part 2-30: Indoor cables; Family specification for optical fibre ribbon cables (IEC 60794-2-30:2003) / Note: Endorsement notice
EN 60794-3-10-2002 Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables (IEC 60794-3-10:2002, modified) / Note: Endorsement notice
EN 60794-3-20-2002 Optical fibre cables - Part 3-20: Outdoor cables; Family specification for optical self-supporting aerial telecommunication cables (IEC 60794-3-20:2002, modified) / Note: Endorsement notice
EN 60794-3-2002 Optical fibre cables - Part 3: Sectional specification; Outdoor cables (IEC 60794-3:2001)
EN 60794-3-30-2003 Optical fibre cables - Part 3-30: Outdoor cables; Family specification for optical telecommunication cables for lake and river crossings (IEC 60794-3-30:2002) / Note: Endorsement notice. Applies only in conjunction with EN 60794-1-1 (2002), EN 60794-1-2
EN 60811-1-1-1995+A1-2001 Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties (IEC 60811-1-1:1993)
EN 60811-1-2-1995 +A2-2000 Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 2: Thermal ageing methods (IEC 60811-1-2:1985 + corrigendum 1986 + A1:1989)
EN 60811-1-3-1995 +A1-2001 Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 3: Methods for determining the density - Water absorption tests - Shrinkage test (IEC 60811-1-3:1993)
EN 60811-1-4-1995 +A2-2001 Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 4: Test at low temperature (IEC 60811-1-4:1985 + corrigendum 1986 + A1:1993)
EN 60811-2-1-1998 +A1-2001 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests (IEC 60811-2-1:1998)
EN 60811-3-1-1995 +A1-1996+A2-2001 Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking (IEC 60811-3-1:1985 + Corrigendum 1986)
EN 60811-3-2-1995 Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test (IEC 60811-3-2:1985 + Corrigendum 1986 + A1:1993)
EN 60811-4-1-1995 Insulating and sheathing materials of electric cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 1: Resistance to environmental stress cracking - Wrapping test after thermal ageing in air - Meas
EN 60811-4-2-1999 Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Tensile strength and elongation at break after pre-conditioning-Wrapping text often thermal ageing in air-Measurement of mass increase-Long-term stablity text-Text method for Copper-cotalyed oxidation
EN 60811-5-1-1999 Insulating and sheathing materials of electric cables and optical fibre cables - Common test methods - Part 5: Methods specific to filling compounds - Section 1: Drop point; separation of oil - lower temperature brittleness; total acid number; absence of
EN 60874-17-1997 Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) (IEC 60874-17:1995 + Corrigendum 1996)
EN 60885-2-2003 Electrical test methods for electric cables - Part 2: Partial discharge tests (IEC 60885-2:1987) / Note: Endorsement notice
EN 60885-3-2003 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988) / Note: Endorsement notice
EN 60966-1-1999 Radio frequency and coaxial cables assemblies - Part 1: Generic specification - General requirements and test methods (IEC 60966-1:1999)
EN 60966-2-1-1995+A1-1997 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies (IEC 60966-2-1:1991)
EN 60966-2-2-1994 Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies (IEC 60966-2-2:1992)
EN 60966-2-3-1999 Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies (IEC 60966-2-3:1996)
EN 60966-2-4-2003 Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-2 connectors (IEC 60966-2-4:2003) / Note: Endorsement notice
EN 60966-2-5-2003 Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1000 MHz, IEC 60169-2 connectors (IEC 60966-2-5:2003) / Note: Endorsement notice
EN 60966-2-6-2003 Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-24 connectors (IEC 60966-2-6:2003) / Note: Endorsement notice
EN 60966-3-1-1994 Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (IEC 60966-3-1:1992)
EN 60966-3-1994 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:1992)
EN 60966-3-2-1999 Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-3-2:1996)
EN 60966-4-1-1994 Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies (IEC 60966-4-1:1994)
EN 60966-4-1994 Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:1992)
EN 60974-12-1995 Arcwelding equipment - Part 12: Coupling devices for welding cables (IEC 60974-12:1992, modified)
EN 61076-4-110-2002 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (IEC 61076-4-110:2001)
EN 61076-7-2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval; Sectional specification (IEC 61076-7:2000)
EN 61138-1997 +A11-2003 Cables for portable earthing and short-circuiting equipment (IEC 61138:1994 + A1:1995, modified)
EN 61169-24-2001 Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 61169-24:2001)
EN 61196-2-2003 Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995) / Note: Endorsement notice
EN 61196-3-1998 Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998)
EN 61196-3-2-1997 Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997)
EN 61196-3-3-1997 Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997)
EN 61238-1-2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (U<(Index)m> = 42 kV) - Part 1: Test methods and requirements (IEC 61238-1:2003, modified) / Note: Endorsement notice
EN 61300-2-35-1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests-Cable nutation (IEC 61300-2-35:1995)
EN 61300-2-4-1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention (IEC 61300-2-4:1995)
EN 61313-1-1997 Fibre optic passive components and cable assemblies - Part 1: Capability approval - Generic specification (IEC 61313-1:1995)
EN 61316-1999 Industrial cable reels (IEC 61316:1999)
EN 61515-1996 Mineral insulated thermocouple cables and thermocouples (IEC 61515:1995)
EN 61537-2001 Cable tray systems and cable ladder systems for cable management (IEC 61537:2001)
EN 61726-2000 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:1999)
EN 61935-1-2000 +A1-2002 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling (IEC 61935-1:2000)
EN 61935-2-2003 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 2: Patch cords and work area cords (IEC 61935-2:2003) / Note: Endorsement notice. Includes Corrigendum of September 2003
EN 62012-1-2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification (IEC 62012-1:2002) / Note: Endorsement notice
EN 62037-1999 RF connectors, connector cable assemblies and cables - Intermodulation level measurement (IEC 62037:1999)
EN ISO 10807-1996 Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere (ISO 10807:1994)
EN ISO 5828-2001 Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001)
EN ISO 6551-1995 Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982)
EN ISO 8205-1-2002 Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002)
EN ISO 8205-2-2002 Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002)
EN ISO 8205-3-1996 Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993)
ENV 50213-1998 Metallic screened cables for airfield lighting
HD 120 S1-1977 Characteristic impedances and dimensions of radio-frequency coaxial cables
HD 134.5 S1-1977 Radio-frequency connectors-part 5: R.F. coaxial connectors for cables 96 IEC 60050-17 and larger
HD 134.6 S1-1977 Radio-frequency connectors; part 6: R.F. coaxial connectors for cables 96 IEC 60075-17 and larger
HD 21.1 S4-2002 Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 1: General requirements
HD 21.10 S2-2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 10: Extensible leads
HD 21.11 S1-1995+A1-2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 11: Cables for luminaires
HD 21.12 S1-1994 +A1-2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat-resistant flexible cables (cords)
HD 21.13 S1-1995 +A1-2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 13: Oil resistant PVC sheated cables with two or more conductors
HD 21.14 S1-2003 Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 14: Flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds
HD 21.2 S3-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
HD 21.3 S3-1995 +A1-1999 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring (IEC 60227-3:1993, modified)
HD 21.4 S2-1990 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
HD 21.5 S3-1994 +A1-1999+A2-2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 5: flexible cables (cords) (IEC 60227-5:1979, modified)
HD 21.7 S2-1996+A1-1999 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90℃
HD 21.8 S2-1999 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 8: Single core non-sheathed cables for decorative chains
HD 21.9 S2-1995 +A1-1999 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheated cable for installation at low temperatures
HD 22.1 S4-2002 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1: General requirements
HD 22.10 S1-1994+A1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 10: EPR insulated and polyurethane sheathed flexible cable
HD 22.11 S1-1995 +A1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 11: EVA cords and flexible cables
HD 22.12 S1-1996 +A1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat resistant EPR cords and flexible cables
HD 22.13 S1-1996+A1-2000 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases
HD 22.14 S2-2002 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14: Cords for applications requiring high flexibility
HD 22.15 S1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber
HD 22.16 S1-2000 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 16: Water resistant polychloroprene or equivalent synthetic elastomer sheathed cables
HD 22.2 S3-1997 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
HD 22.3 S3-1995 +A1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone rubber insulated cables (IEC 60245-3:1980, modified) / Note: To be replaced by prHD 22.3 S4 (2003-05).
HD 22.4 S3-1995 +A1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables (IEC 60245-4:1994, modified) / Note: To be replaced by prHD 22.4 S4 (2003-05).
HD 22.6 S2-1995 +A1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 6: Arc welding cables / Note: To be amended by HD 22.6 S2/prA2 (2003-05).
HD 22.7 S2-1995+A1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110℃ / Note: To be amended by HD 22.7 S2/prA2 (2003-05).
HD 22.8 S2-1994+A1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for decorative chains / Note: To be amended by HD 22.8 S2/prA2 (2003-05).
HD 22.9 S2-1995+A1-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases
HD 27 S1-1974 Colours of the cores of flexible cables and cords
HD 308 S2-2001 Identification of cores in cables and flexible cords
HD 359 S2-1990 Flat polyvinylchloride sheathed lift cables
HD 361 S3-1999 System for cable designation
HD 364 S2-1983 High-voltage cable plug and socket connections for medical X-ray equipment
HD 383 S2-1986+A1 -1989+A2-1993 Conductors of insulated cables; guide to the dimensional limits of circular conductors
HD 428.2.1 S1-1994 Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high voltage and/or low voltage side - Section 1: General req uirements
HD 428.2.2 S1-1997 Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Section 2: Cable boxes
HD 428.2.3 S1-1998 Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Section 3: Cable boxes
HD 446.3 S1-1993 Thermocouples; Part 3: Extension and compensating cables; Tolerances and identification system (IEC 60584-3:1989, modified)
HD 489 S1-1987 Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors
HD 516 S2-1997 +A1-1997 Guide to use of low voltage harmonized cables
HD 586.3 S1-2001 Mineral insulated cables with a rated voltage not exceeding 750 V - Part 3: Guide to use
HD 603 S1-1994 +A1-1997 Distribution cables of rated voltage 0,6/1 kV
HD 604 S1-1994 +A1-1997 0.6/1 kV power cables with special fire performance for use in power stations
HD 605 S1-1994+A1-1996 +A2-2001+A3-2002 Electrical cables - Additional test methods / Note: To be amended by HD 605 S1/prA4 (2003-08).
HD 609 S1-1995 Sectional specification for equipment cables to be used for digital and analogue communication
HD 620 S1-1996 +A1-2001 Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV
HD 621 S1-1996 +A1-2001 Medium voltage impregnated paper insulated distribution cables
HD 622 S1-1996 +A1-2000 Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations
HD 623 S1-1996+A1-2001 Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV / Note: To be replaced by prEN 50393 (2003-07).
HD 626 S1-1996 +A1-1997+A2-2002 Overhead distribution cables of rated voltage U<(Index)o>/U(U<(Index)m>): 0,6/1 (1,2) kV
HD 627 S1-1996 +A1-2000 Power cables - Multicore and multipair cable for installation above and below ground
HD 628 S1-1996+A1-2001 Test methods for accessories for power cables with rated voltage from 3,6/6 kV(Um = 7,2 kV) up to and including 20,8/36 kV(Um = 42 kV)
HD 629.1 S1-1996 +A1-2001 Test requirements on accessories for use on power cables of rated voltages from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 1: Cables with extruded insulation / Note: To be replaced by prHD 629.1 S2 (2003-10).
HD 629.2 S1-1997 +A1-2001 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 2: Cables with impregnated paper insulation / Note: To be replaced by prHD 629.2 S2 (2003-10).
HD 631.1 S1-1998 Material characterisation - Part 1: Compounds for use in cable accessories: Resinous compounds before cure and in the cured state
HD 632 S1-1998 Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV)
HD 633 S1-1997 Tests on oil-filled (fluid-filled), paper- and polypropylene paper laminate-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um=420 kV)
HD 634 S1-1997 Tests on internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV)
HD 635 S1-1997 Tests on external gas-pressure (gas compression) cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV)
prEN 14280-2001 Plastics piping systems for buried cable ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system
prEN 14282-2001 Plastics piping systems for buried cable ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system
prEN 177000-1992 Generic specification: optical fibre connector/cable assemblies; capability approval
prEN 2084-2000 Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification
prEN 2234-2001 Aerospace series - Cable, electrical, fire resistant - Technical specification
prEN 2235-1999 Aerospace series - Single and multicore electric cables, screened and jacketed
prEN 2266-002-2000 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: General
prEN 2266-007-2000 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 007: UV laser printable multicore jacketed cable - Product standard
prEN 2267-002-2000 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: General
prEN 2267-007-1999 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard
prEN 2267-008-1999 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 008: DM family, single UV laser printable and multicore assembly - Product standard
prEN 2346-002-2001 Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 002: General
prEN 2346-003-2001 Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 003: DL family, single core; Product standard
prEN 2346-004-2001 Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 004: DN family, single UV laser printable and multicore assembly; Light weight; Product standard
prEN 2591-609-1999 Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing
prEN 2713-002-2000 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: Screened and jacketed - General
prEN 2713-011-2000 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
prEN 2714-002-2000 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: Screened and jacketed - General
prEN 2714-011-1999 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard
prEN 2714-012-1999 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard
prEN 2853-1998 Aerospace series - Current ratings for electrical cables with conductor EN 2083
prEN 3475-203-1999 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
prEN 3475-306-2001 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 306: Continuity of conductors
prEN 3475-411-1999 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
prEN 3475-414-1999 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
prEN 3475-415-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 415: Rapid change of temperature
prEN 3475-416-2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 416: Thermal ageing
prEN 3475-513-2001 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
prEN 3475-601-2001 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
prEN 3475-602-2001 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
prEN 3719-1999 Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
prEN 4434-1999 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard
prEN 45510-2-8-2000 Guide for procurement of power station equipment - Electrical equipment - Part 2-8: Power cables
prEN 45541-1995 Guide for procurement - Electrical equipment - Cabling systems
prEN 45542-1995 Guide for procurement - Electrical equipment - LV/MV cables
prEN 4604-001-2002 Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification
prEN 4604-002-2002 Aerospace series - Cable, electrical, for signal transmission - Part 002: General
prEN 4604-003-2002 Aerospace series - Cable, electrical, for signal transmission - Part 003: Coaxial cable 50 Ohm, 200℃, type WZ; Product standard
prEN 4604-004-2002 Aerospace series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200℃, type WS; Product standard
prEN 4604-005-2001 Aerospace series - Cable, electrical, for signal transmission - Part 005: Cable, coaxial, 75 Ohms, 200℃, type WL; Product standard
prEN 4604-006-2002 Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 Ohms, 200℃, type WM; Product standard
prEN 4604-007-2002 Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 Ohms, 200℃, type WN; Product standard
prEN 474-12-1998 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators
prEN 50085-2-1-2002 Cable trunking and cable ducting systems for electrical installations - Part 2-1: Particular requirements for cable trunking systems and cable ducting systems intended for mounting on walls and/or ceilings
prEN 50090-9-1-2003 Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements; Generic cabling for HBES class 1 twisted pair
prEN 50118-1993 Cable reels for household and similar purposes (IEC 23B(Secretariat)323)
prEN 50174-3-2003 Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings
prEN 50290-1-2-1999 Communication cables - Part 1-2: Definitions
prEN 50290-2-1-2002 Communication cables - Part 2-1: Common design rules and construction / Note: Applies in conjunction with EN 50290-1-1
prEN 50290-3-1999 Communication cables - Part 3: Quality assessment
prEN 50369-2003 Liquid tight sheathing systems for cable management
prEN 6049-001-2001 Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 001: Technical specification
prEN 6049-006-2001 Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation; Product standard
prEN 6059-100-2001 Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 100: General
prEN 6059-303-2001 Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 303: Resistance to fluids
prEN 6059-406-2001 Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 406: Vibration
prEN 60728-6-2003 IEC 60728-6: Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
prEN 60794-4-1-1998 IEC 60794-4-1: Optical fibre cables - Part 4-1: Aerial optical cables for high voltage power lines
prEN 60794-4-2003 IEC 60794-4, Ed. 2.0: Optical fibre cables - Part 4: Sectional specification; Aerial optical cables along electrical power lines
prEN 61156-1991 Draft IEC 61156: generic specification for multicore and symmetrical pair/quad cables for digital communications
prEN 61279-1993 IEC 61279; sectional specification; optical telecommunication cables
prHD 359 S3-1993 Flat polyvinyl chloride sheathed flexible cables
prHD 361 S3-1998 System for cable designation