Application

The cables are designed in railways signalling networks, and are suitable for installation in ducts or laying directly into the ground.

Standard

• Dlk 1.013.107y
• Dlk 1.013.108y (for 1.4/1.8mm conductor H95 type)
• Dlk 1.013.110y

Cable Construction

• Type CodesConductors: Solid annealed copper, 0.9, 1.4 or 1.8 mm nominal diameter.
• Insulation: Solid polyethylene.
• Stranding: Single conductors are helically stranded in concentric layers. Cables from 14 conductors on have two extra conductors of 0.5mm with perforated insulation (surveillance conductors).
• Core Wrapping: Plastic tape(s) with overlapping.
• Inner Sheath: Low density polyethylene.
• Armouring: One layer of galvanized steel tape (0.2-0.3mm) or two layers of galvanized steel tapes (0.1mm).
• Outer Sheath: Low density polyethylene.

• AJ- outdoor cable with protection against inductive infl uences
• 2Y solid PE conductor insulation
• 2Y inner PE sheath
• B steel tape armor
• 2Y outer PE sheath
• S signal cable
• LG layer stranding
• H (n) operating capacity

Electrical Characteristics at 20℃

*The value“ 95” is only for cables with 1.4/1.8mm conductors according to Dlk 1.013.108y.

Mechanical and Thermal Properties

• Minimum Bending Radius: 10×OD
• Temperature Range: -40℃ to +60℃ (during operation); -10℃ +60℃ (during installation)

Dimensions and Weight

A-2Y2YB2Y n×1× 0.9 S(H115)

A-2Y2YB2Y n×1×1.4/1.8 S(H145)

A-2Y2YB2Y n×1×1.4 S(H95)