?????????????? Adobe Flash Player?

?? Adobe Flash Player

Home
About Us
Products
Download
Technical Lib
Contact
Enquiry
Sitemap
Links
 
Alarm & Audio & Electronic Cables
Automotive Cables
Airport Cables
Belden Equivalent Cables
Bus Cables
Cable Glands
Cables for Oil Industry
Coaxial Cables
Control Cables
Composite Cables

Data Cable

Fiber Optic Cables

Flexible Cables
Fire Resisting Cable(Fireflex)
LSZH Flame Retardant Cable
PVC Flame Retardant Cable
Heat Detection Cables
High Temperature Cables
Highway Cables
Industrial Cables
Instrumentation Cables
Lan Cables
Marine Cables
NEK606 Water Blocked Offshore & Marine Cables
IEC60092 STANDARD Offshore & Marine Cables
BS 6883&BS7917 STANDARD Offshore & Marine Cables
Marine, OIL,GAS & Petrochemical Cables
Medium Voltage Cables
Military Cables
Mining Cables
Motor Connecting Cables
Power Cables
Photovoltaic Cables
Railway Cables
Robotics
Rolling Stock Cables
Rubber & Crane Cables
Security Cables
Shipboard Cables(JIS)
Special Cables
Spiral Cables
Submarine Cables
Submersible Pump Cables for Oil Industry
Telephone Cables
Thermocouple Cables
Undersea Cables
Windmill Cables
Other Cables
BS 5308 Cable
BS 5467 Cable
BS 6724 Cable
BS 6346 Cable
BS 7211 Cable
BS 8573 Cable
IEC 60502-1 Cable
 
 
 


ANSI cable standards

ANSI cable standards

EN |  BS |  DIN |  IEC |  IEEE  |  NF  |  ANSI |  JIS  |  GB |  ISO | 
Code Name
ANSI E1.16-2002 Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables
ANSI E1.27-1-2006 Entertainment Technology - Standard for Portable Control Cables for use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products
ANSI J-STD-042-2002 Emergency Alert Message for Cable
ANSI T1.307-2003 Telecommunications - Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies and Fire Spread Requirements for Wire and Cable
ANSI/AAMI EC53-1995 ECG Cables and Wires
ANSI/AAMI EC53A-1998 ECG Cables and Wires
ANSI/API SPEC17E-2003 Specification for Subsea Umbilicals
ANSI/ASTM A523-1996 Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
ANSI/ASTM D1047-1995 Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable (10.01)
ANSI/ASTM D1351-2002 Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
ANSI/ASTM D1523-2000 Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operations (10.01)
ANSI/ASTM D2219-2002 Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation, Specification for (10.01)
ANSI/ASTM D2220-2002 Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation, Specification for (10.01)
ANSI/ASTM D2308-2002 Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
ANSI/ASTM D2633-2002 Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable
ANSI/ASTM D2655-2000 Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
ANSI/ASTM D2656-2000 Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35V (10.02)
ANSI/ASTM D2768-1995 Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable (10.02)
ANSI/ASTM D2770-2001 Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
ANSI/ASTM D2802-2003 Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable
ANSI/ASTM D3485-2002 Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ANSI/ASTM D3554-2001 Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable
ANSI/ASTM D3555-2001 Specification for Track-Resistant Black Crosslinked Thermosetting Polyethylene Insulation for Wire and Cable
ANSI/ASTM D4244-1995 Specification for General-Purpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene Polyvinyl Chloride (NBR PVC) Jackets for Wire and Cable (10.02)
ANSI/ASTM D4245-2002 Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation
ANSI/ASTM D4246-2002 Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90oC Operation
ANSI/ASTM D4313-2003 Specification for General Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene Jackets for Wire and Cable
ANSI/ASTM D4314-1999 Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02)
ANSI/ASTM D4363-1998 Specification for Thermoplastic Chlorinated Polyethylene Jacket for Wire and Cable
ANSI/ASTM D4565-1999 Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)
ANSI/ASTM D4566-1998 Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)
ANSI/ASTM D4568-1999 Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials (10.02)
ANSI/ASTM D470-2005 Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01)
ANSI/ASTM D4730-2002 Specification for Flooding Compounds for Telecommunications Wire and Cable
ANSI/ASTM D4731-2002 Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
ANSI/ASTM D4732-2002 Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
ANSI/ASTM D4872-1999 Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ANSI/ASTM D5424-2005 Test Method for Smoke Obscuration Caused by Burning Cables in a Vertical Configuration (10.02)
ANSI/ASTM D5537-2003 Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ANSI/ASTM D6070-2002 Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ANSI/ASTM D6096-2002 Specification for Poly(vinyl Chloride) Insulation for Wire and Cable, 90 C Operation
ANSI/ASTM D6113-2003 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/ASTM D866-1999 Specification for Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (10.01)
ANSI/ASTM F1835-1997 Guide for Cable Splicing Installations
ANSI/ASTM F1837M-1997 Specification for Heat-Shrink Cable Entry Seals (Metric)
ANSI/ASTM F1883-2003 Practice for Selection of Wire and Cable Size, in AWG or Metric Units
ANSI/CEA 2030-2005 Multi Room Audio Cabling Standard
ANSI/CEA 600.33-1997 Coax Cable Physical Layer and Medium Specification
ANSI/EIA 364-101-2000 Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems
ANSI/EIA 364-102-1998 Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/EIA 364-107-2000 Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/EIA 364-108-2000 Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems
ANSI/EIA 364-38B-1999 Electric Connectors - Cable Pull-Out Test
ANSI/EIA 364-41A-1984 Electric Connectors - Circular Jacket Cable Flexing Test Procedure
ANSI/EIA 364-41C-1999 TP-41 Cable Flexing Test Procedure for Electrical Connectors
ANSI/EIA 364-43B-2000 Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
ANSI/EIA 403-A-1990 Precision Coaxial Connectors for CATV Application (75 Ohms)
ANSI/EIA 429-1976 Connectors, Electrical Flat Cable Type, General Specification for
ANSI/EIA 600.33-1997 Coax Cable Physical Layer and Medium Specification
ANSI/EIA 700AOAE-2000 Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2)
ANSI/EIA 700AOAF-2000 Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)
ANSI/EIA-364-101-2000 Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems
ANSI/EIA-364-102-1998 Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/EIA-364-103-1998 Propogation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/EIA-364-107-2000 Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems
ANSI/EIA-364-108-2000 Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems
ANSI/EIA-364-38B-1999 Cable Pull-Out Test Procedure for Electrical Connectors
ANSI/EIA-364-41C-1999 TP-41 Cable Flexing Test Procedure for Electrical Connectors
ANSI/EIA-364-43B-2000 Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
ANSI/EIA-700AOAE-2000 Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2)
ANSI/EIA-700AOAF-2000 Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)
ANSI/EIA/TIA -455-104A-1993 Fiber Optic Cable Cyclic Flexing Test
ANSI/EIA/TIA 455-6B-1992 Cable Retention Test Procedure for Fiber Optic Cable Interconnecting Devices
ANSI/EIA/TIA-455-37-1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/ICEA P-54-440-2002 Ampacities of Cables Installed in Cable Trays
ANSI/ICEA S-101-699-2001 Category 3 Individually Unshielded Twisted Pair Indoor Cable For Use In General Purpose Non-LAN Telecommunications Wiring Systems Technical Requirements
ANSI/ICEA S-103-701-2004 Riser Cable
ANSI/ICEA S-105-692-2004 600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables
ANSI/ICEA S-108-720-2004 Standard for Extruded Insulation Power Cables Rated Above 46 through 345 KV
ANSI/ICEA S-532-1973 Control, Thermocouple Extension and Instrumentation Cables
ANSI/ICEA S-70-547-2000 Weather-Resistant Polyolefin-Covered Wire and Cable
ANSI/ICEA S-76-474-2005 Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation Rated 600 Volts
ANSI/ICEA S-80-576-2002 Category 1 & 2 Individually Unshielded Twisted Pair Indoor Cables (With or Without an Overall Shield) for Use in Communications Wiring Systems Technical Requirements
ANSI/ICEA S-81-570-2005 Standard for 600 Volt Cables of Ruggedized Design
ANSI/ICEA S-84-608-2002 Telecommunications Cable Filled, Polyolefin Insulated, Copper Conductor - Technical Requirements
ANSI/ICEA S-85-625-2002 Aircore, Polyolefin Insulated, Copper Conductor Telecommunications Cable - Technical Requirements
ANSI/ICEA S-86-634-2004 Telecommunications Cable Buried Distribution and Service Wire - Technical Requirements
ANSI/ICEA S-87-640-1999 Optical Fiber Outside Plant Communications Cable
ANSI/ICEA S-90-661-2002 Individually Unshielded Twisted Pair Indoor Cables for Use In Communication Wiring Systems - Technical Requirements
ANSI/ICEA S-94-649-2005 Concentric Neutral Cables Rated 5,000-46,000 Volts
ANSI/ICEA S-97-682-2000 Utility Shielded Power Cables Rated 5000 - 46,000 Volts
ANSI/ICEA S-98-688-1997 Broadband Twisted Pair Cable Aircore, Polyolefin Insulated, Copper Conductor
ANSI/ICEA S-99-689-1997 Broadband Twisted Pair Cable Filled, Polyolefin Insulated, Copper Conductor
ANSI/ICEA T-26-465-2000 Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/IEEE 1017-2004 Recommended Practice for Field Testing Electric Submersible Pump Cable
ANSI/IEEE 1018-2004 Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation
ANSI/IEEE 1019-2004 Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
ANSI/IEEE 1073.3.2-2000 Medical Device Communications - Transport Profile - IrDA Based - Cable Connected
ANSI/IEEE 1120-2004 Guide to the Factors to Be Considered in Planning, Design, and Installation of Submarine Power and Communication Cable
ANSI/IEEE 1143-1994 Guide on Shielding Practice for Low Voltage Cables
ANSI/IEEE 1185-1994 Guide for Installation Methods for Generating Station Cables
ANSI/IEEE 1202-1991 Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies
ANSI/IEEE 1210-2004 Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable
ANSI/IEEE 1235-2000 Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts
ANSI/IEEE 1242-1999 Guide for Specifying and Selecting Power, Control and Special Purpose Cable for Petroleum and Chemical Plants
ANSI/IEEE 1299/C62.22.1-1996 Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems
ANSI/IEEE 1300-1997 Guide for Cable Connections for Gas Insulated Substations
ANSI/IEEE 1425-2001 Guide for the Evaluation of the Remaining Life of Impregnated Paper Insulated Transmission Cable Systems
ANSI/IEEE 1511-2004 Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV
ANSI/IEEE 383-2003 Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations
ANSI/IEEE 400-2002 Direct Voltage Tests on Power Cables in the Field, Guide for Making
ANSI/IEEE 400.2-2004 Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)
ANSI/IEEE 404-2000 Cable Joints for Use with Extruded Dielectric Cable Rated 5 000 - 138 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2 500-500 000 V
ANSI/IEEE 48-1996 Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations
ANSI/IEEE 515-2004 Cables, Heating-Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications, Recommended Practice for
ANSI/IEEE 525-1993 Design and Installation of Cable Systems in Substations
ANSI/IEEE 576-2000 Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications
ANSI/IEEE 628-2001 Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations, Criteria for the Design, Installation, and Qualification of
ANSI/IEEE 634-2004 Standard for Cable Penetration Fire Stop Qualification Test
ANSI/IEEE 635-2003 Guide for Selection and Design of Aluminum Sheaths for Power Cables
ANSI/IEEE 690-2004 Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
ANSI/IEEE 835-1994 Power Cable Ampacity Tables
ANSI/IEEE 848-1996 Standard Procedure for the Determination of the Ampacity Derating of Fire Protected Cables
ANSI/IEEE C37.20.1a-2005 Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections
ANSI/IPC WHMA-A-620-2002 Requirements and Acceptance for Cable and Wire Harness Asssemblies
ANSI/NECA 104-2006 Recommended Practice for Installing Aluminum Building Wire and Cable
ANSI/NECA 120-2005 Standard for Installing Armored Cable (Type AC) and Metal Clad Cable (Type MC)
ANSI/NECA 600-2003 Recommended Practice for Installing Medium Voltage Cable
ANSI/NEMA FB-1-2003 Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit and Cable Assemblies
ANSI/NEMA VE1-2003 Metal Cable Tray Systems
ANSI/NEMA VE2-2000 Metal Cable Tray Installation Guidelines
ANSI/NEMA WC27500-2000 Aerospace and Industrial Electric Cable
ANSI/NEMA WC53-2000 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/NEMA WC57-2004 Control, Thermocouple Extension and Instrumentation Cables
ANSI/NEMA WC63.2-1996 Performance Standard for Coaxial Premise Data Communications Cables
ANSI/NEMA WC66-2001 Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair Cables
ANSI/NEMA WC70-1999 Nonshielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
ANSI/NEMA WC71-1999 Nonshielded Cables Rated 2001-5000 Volts for Use in the Distribution of Electric Energy
ANSI/NEMA WC74-2000 5-46kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy
ANSI/NFPA 262-2002 Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces
ANSI/SAE J1067-1998 Seven-Conductor Cable
ANSI/SAE J1494-1997 Battery Booster Cables
ANSI/SAE J2394-1998 Seven-Conductor Cable for ABS Power
ANSI/SAE J560-1998 Seven Conductor Electrical Connector for Truck-Trailer Jumper Cables
ANSI/SCTE 03-2003 Test Method for Coaxial Cable Structural Return Loss
ANSI/SCTE 10-2001 Test Method for Flexible Coaxial Cable Impact Test
ANSI/SCTE 100-2004 Specification for 75 Ohm Smooth Aluminum Subscriber Access Cable
ANSI/SCTE 102-2005 Cable Retention Force Testing of Trunk & Distribution Connectors
ANSI/SCTE 103-2004 Test Method for DC Contact Resistance, Drop cable to F-Connectors and F81 Barrels
ANSI/SCTE 105-2005 Uni-Directional Receiving Device Standard for Digital Cable
ANSI/SCTE 107-2005 Embedded Cable Modem Device Specification
ANSI/SCTE 11-2001 Test Method for Aerial Cable Corrosion Protection Flow
ANSI/SCTE 12-2001 Center Conductor Bond to Dielectric for Trunk, Feeder and Distribution Coaxial Cables
ANSI/SCTE 13-2001 Dielectric Air Leakage Test Method For Trunk, Feeder and Distribution Coaxial Cable
ANSI/SCTE 15-2002 Specification for Trunk, Feeder, and Distribution Coaxial Cable
ANSI/SCTE 21-2002 Carriage of National Television System Committee (NTSC) Vertical Blinking Interval (VBI) Data in Cable Digital Transport Streams
ANSI/SCTE 24-18-2004 IPCablecom CMS to CMS Signaling
ANSI/SCTE 24-20-2005 Requirements for Preferential Telecommunications over IPCablecom Networks
ANSI/SCTE 25-1-2002 Hybrid Fiber/Coax Outside Plant Status Monitoring - Physical (PHY) Layer
ANSI/SCTE 25-2-2002 Hybrid Fiber/Coax Outside Plant Status Monitoring - Media Access Control (MAC) Layer
ANSI/SCTE 25-3-2005 Hybrid Fiber/Coax Outside Plant Status Monitoring Part 3: - PS to T Interface SCTE Subcommittee Code: HMS 022
ANSI/SCTE 25-4-2002 Hybrid Fiber/Coax Outside Plant Status Monitoring Part 4: HMS Power Supply to Transponder Interface Acceptance Test
ANSI/SCTE 27-2003 Subtitling Methods for Broadcast Cable
ANSI/SCTE 33-2002 Diameter of Drop Cable
ANSI/SCTE 35-2004 Digital Program Insertion Cueing Message for Cable
ANSI/SCTE 37-2003 Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOT Management Information Base (MIB) Definition
ANSI/SCTE 38-2-2005 Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-ALARMS-MIB Management Information Base (MIB)
ANSI/SCTE 38-3-2002 Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-COMMON-MIB Management Information Base (MIB)
ANSI/SCTE 38-4-2002 Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-PS-MIB Management Information Base (MIB)
ANSI/SCTE 38-5-2002 Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-FIBERNODE-MIB Management Information Base
ANSI/SCTE 38-7-2002 Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-Transponder Interface Bus (TIB)-MIB Management Information Base (MIB) Definition
ANSI/SCTE 38-8-2002 Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-DOWNLOAD-MIB Management Information Base (MIB) Definition
ANSI/SCTE 39-2002 Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables
ANSI/SCTE 40-2004 Digital Cable Network Interface Specification
ANSI/SCTE 48-2-2003 Test Procedure for Measuring Relative Shielding Properties of Active and Passive Coaxial Cable Devices Using H-P Magnetic Close Field Probe
ANSI/SCTE 48-3-2004 Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell
ANSI/SCTE 50-2002 Test Procedure for Measuring Regularity of Impendance of Coaxial Cable
ANSI/SCTE 51-2002 Test Method for Determining Drop Cable Braid Coverage
ANSI/SCTE 57-2003 System Information for Satellite Distribution of Digital Television for Cable and MMDS
ANSI/SCTE 66-2003 Test Method for Coaxial Cable Impedance
ANSI/SCTE 71-2003 Specification for Braided, 75 ohm, Coaxial, Multi-Purpose Cable
ANSI/SCTE 72-2002 Test Method for Axial Load Temperature Cycling of Drop Cable/Connector Interface
ANSI/SCTE 73-2002 Test Method for Insertion Force of Connector to Drop Cable Interface
ANSI/SCTE 74-2003 Specification for Braided 75 Ohm Flexible RF Coaxial Drop Cable
ANSI/SCTE 87-1-2003 Graphic Symbols for Cable Telecommunications - Part 1: HFC Symbols
ANSI/SCTE 89-1-2004 IPCable2Home Standard Part 1: Cable Home Networking 1.0
ANSI/SCTE 89-2-2005 IPCable2Home Standard Part 2 - Cable Home Networking 1.1
ANSI/SCTE 96-2003 Cable Telecommunications Testing Guidelines
ANSI/SCTE 97-2004 Metadata Requirements for Video-On-Demand in Cable Networks
ANSI/SCTE 99-2004 Test Method For Axial Pull Connector/Drop Cable
ANSI/SCTE TP007-1998 Test Method for Coaxial Cable Structural Return Loss
ANSI/SMPTE 276M-1995 Television - Transmission of AES/EBU Digital Audio Signals Over Coaxial Cable
ANSI/TIA-455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling
ANSI/TIA-455-171-A-2001 Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single Mode Optical Fiber Cable Assemblies
ANSI/TIA-455-1B-1998 Cable Flexing for Fiber Optic Interconnecting Devices
ANSI/TIA-455-41A-1993 Compressive Loading Resistance of Fiber Optic Cable
ANSI/TIA-455-80-C-2003 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
ANSI/TIA-455-81-B-2000 Compound Flow (Drip) Test for Filled Fiber Optic Cable
ANSI/TIA-455-84B-1992 Jacket Self-Adhesion (Blocking) for Fiber Optic Cable
ANSI/TIA-455-87B-1993 Knot Test for Fiber Optic Cable
ANSI/TIA-455-89B-1998 Jacket Elongation and Tensile Strength for Fiber Optic Cable
ANSI/TIA-568 -B.2-9-200x-2005 Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures
ANSI/TIA-568-B-3-1-2002 Optical Fiber Cabling Components Standard - Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables
ANSI/TIA-568-B-3-2000 Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling
ANSI/TIA-568-B.1-1-2001 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
ANSI/TIA-568-B.1-2-2003 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling
ANSI/TIA-568-B.1-2001 Commercial Building Telecommunications Cabling Standard
ANSI/TIA-568-B.1-3-2003 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type
ANSI/TIA-568-B.1-4-2003 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
ANSI/TIA-568-B.1-5-2004 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 5 - Telecommunications Cabling for Telecommunications Enclosures
ANSI/TIA-568-B.2-1-2002 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling
ANSI/TIA-568-B.2-11-2005 Commercial Building Telecommunications Cabling Standard - Part2: Balanced Twisted-Pair Cabling Components - Addendum 11: Specification for Increased Diameter of 4-Pair UTP and ScTP Cables
ANSI/TIA-568-B.2-2-2001 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
ANSI/TIA-568-B.2-2001 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
ANSI/TIA-568-B.2-3-2002 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination
ANSI/TIA-568-B.2-4-2002 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware
ANSI/TIA-568-B.2-5-2003 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 5
ANSI/TIA-568-B.2-6-2003 Commercial Building Telecommunicatins Cabling Standard - Part 2: Balanced Twisted-Pair Cabling Components - Addendum 6 - Category 6 Related Component Test Procedures
ANSI/TIA-758-1-1999 Customer-Owned Outside Plant Telecommunications Cabling
ANSI/TIA-758-A-2004 Customer-Owned Outside Plant Telecommunications Cabling
ANSI/TIA-854-2001 A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling
ANSI/TIA-862-2002 Building Automation Systems Cabling Standard for Commercial Buildings
ANSI/TIA/EIA 455-11C-2002 Vibration Test Procedure for Fiber Optic Components and Cables
ANSI/TIA/EIA 455-1B-1998 Cable Flexing for Fiber Optic Interconnecting Devices
ANSI/TIA/EIA 455-200-2001 Insertion Loss of Connectorized Polarization - Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies
ANSI/TIA/EIA 455-201-2001 Return Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies
ANSI/TIA/EIA 455-61A-2000 Measurement of Fiber or Cable Attenuation Using an OTDR
ANSI/TIA/EIA 455-80-C-2003 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
ANSI/TIA/EIA 455-95A-2000 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/TIA/EIA 472D000-A-1993 Sectional Specification for Fiber Optic Communications Cable for Outside Plant Use
ANSI/TIA/EIA 568-B-3-2000 Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling
ANSI/TIA/EIA 568-B.1-1-2001 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
ANSI/TIA/EIA 568-B.1-2-2003 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling
ANSI/TIA/EIA 568-B.1-2001 Commercial Building Telecommunications Cabling Standard
ANSI/TIA/EIA 568-B.1-3-2003 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type
ANSI/TIA/EIA 568-B.1-4-2003 Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
ANSI/TIA/EIA 568-B.2-1-2002 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling
ANSI/TIA/EIA 568-B.2-2-2001 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
ANSI/TIA/EIA 568-B.2-2001 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling
ANSI/TIA/EIA 568-B.2-3-2002 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination
ANSI/TIA/EIA 568-B.2-4-2002 Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware
ANSI/TIA/EIA 570-A-2-2002 Residential Telecommunications Cabling Standard - Addendum 2 - Control Cabling for Residences
ANSI/TIA/EIA 570-A-3-2002 Residential Telecommunications Cabling Standard - Addendum 3 - Whole-Home Audio Cabling for Residences
ANSI/TIA/EIA 758-1-1999 Customer-Owned Outside Plant Telecommunications Cabling
ANSI/TIA/EIA 758-1999 Customer-Owned Outside Plant Telecommunications Cabling
ANSI/TIA/EIA 854-2001 A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling
ANSI/TIA/EIA 862-2002 Building Automation Systems Cabling Standard for Commercial Buildings
ANSI/UL 1072-2006 Standard for Safety for Medium-Voltage Power Cables (Proposal dated February 24, 2006)
ANSI/UL 1277-2005 Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (4th edition)
ANSI/UL 13-2005 Standard for Safety for Power-Limited Circuit Cables
ANSI/UL 1424-2005 Standard for Safety for Cables for Power-Limited Fire-Alarm Circuits
ANSI/UL 1426-2001 Cables for Boats
ANSI/UL 1569-2005 Standard for Safety for Metal-Clad Cables
ANSI/UL 1655-2004 Standard for Safety for Community-Antenna Television Cables
ANSI/UL 1666-2002 Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts
ANSI/UL 1682-1998 Standard for Safety for Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type
ANSI/UL 209-2005 Standard for Safety for Cellular Metal Floor Raceways and Fittings
ANSI/UL 2196-2004 Standard for Tests for Fire Resistive Cables
ANSI/UL 2225-2005 Standard for Safety for Cables and Cable-Fittings for Use in Hazardous (Classified) Locations
ANSI/UL 2239-2004 Standard for Hardware for the Support of Conduit, Tubing and Cable
ANSI/UL 2556-2005 Standard Test Methods for Wires and Cables (Bulletin)
ANSI/UL 4-2003 Armored Cable
ANSI/UL 44-2005 Rubber-Insulated Wires and Cables
ANSI/UL 444-2005 Standard for Safety for Communications Cables
ANSI/UL 493-1997 Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables
ANSI/UL 5-2003 Surface Metal Raceways and Fittings
ANSI/UL 568-2004 Standard for Safety for Nonmetallic Cable Tray Systems
ANSI/UL 5A-2003 Standard for Safety for Non-Metallic Surface Raceways and Fittings
ANSI/UL 5B-2004 Strut-Type Channel Raceways and Fittings
ANSI/UL 5C-2003 Standard for Safety for Surface Raceways and Fittings for Use with Data, Signal and Control Circuits
ANSI/UL 83-2003 Thermoplastic-Insulated Wires and Cables
ANSI/UL 854-2002 Service-Entrance Cables
ANSI/UL 884-2005 Standard for Safety for Underfloor Raceways and Fittings
ASTM A 523-1996 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
ASTM B 694-2003 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
ASTM B 736-2000 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
ASTM B 784-2000 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
ASTM D 1047-1995 Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
ASTM D 1248-2005 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
ASTM D 1351-2002 Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
ASTM D 1523-2000 Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation
ASTM D 2219-2002 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
ASTM D 2220-2002 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
ASTM D 2308-2002 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
ASTM D 2633-2002 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
ASTM D 2655-2000 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
ASTM D 2656-2000 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
ASTM D 2768-1995 Standard Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable
ASTM D 2770-2001 Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
ASTM D 2802-2003 Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
ASTM D 3485-2002 Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ASTM D 3554-2001 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation
ASTM D 3555-2001 Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90oC Operation
ASTM D 4244-1995 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable
ASTM D 4245-2002 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
ASTM D 4246-2002 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
ASTM D 4313-2003 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
ASTM D 4314-2005 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
ASTM D 4363-1998 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
ASTM D 4565-1999 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM D 4566-2005 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM D 4568-1999 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
ASTM D 470-2005 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D 4730-2002 Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
ASTM D 4731-2002 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
ASTM D 4732-2002 Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
ASTM D 4872-1999 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ASTM D 532-1990 Natural Rubber Jacket for Wire and Cable
ASTM D 5424-2005 Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM D 5537-2003 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM D 5875-1995 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 6070-2002 Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ASTM D 6096-2002 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation
ASTM D 6113-2003 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D 831-1994 Standard Test Method for Gas Content of Cable and Capacitor Oils
ASTM D 866-1999 Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable
ASTM E 585/E 585M-2004 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
ASTM F 1835-1997 Standard Guide for Cable Splicing Installations
ASTM F 1837M-1997 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
ASTM F 1883-2003 Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units
ASTM F 2180-2002 Standard Specification for Metallic Implantable Strands and Cables
UL 1063-1998 (Machine-tool wires and cables )
UL 1072-1995 (Medium-voltage power cables )
UL 1277-2001 (Electrical power and control tray cables with optional optical-fiber members )
UL 13-1996 (Power-limited circuit cables )
UL 1309-1995 (Marine shipboard cable )
UL 1425-1998 (Cables for non-power-limited fire-alarm circuits )
UL 1426-2001 (Electrical cables for boats )
UL 1569-1999 (Metal-clad cables )
UL 1581-2001 (Reference standard for electrical wires, cables, and flexible cords )
UL 1651-1997 (Optical fiber cable )
UL 1655-1997 (Community-antenna television cables )
UL 1666-2000 (Test for flame propagation height of electrical and optical-fiber cables installed vertically in shafts )
UL 1673-1996 (Electric space heating cables )
UL 1682-2002 (Plugs, receptacles, and cable connectors, of the pin and sleeve type )
UL 1685-1997 (Vertical-tray fire-propagation and smoke-release test for electrical and optical-fiber cables )
UL 209-1998 (Cellular metal floor raceways and fittings )
UL 2196-2001 (Tests for fire resistive cables )
UL 2225-1996 (Metal-clad cables and cable-sealing fittings for use in hazardous (classified) locations )
UL 2250-1999 (Instrumentation tray cable )
UL 4-1996 (Armored cable )
UL 44-1999 (Thermoset-insulated wires and cables )
UL 444-2002 (Communications cables )
UL 493-1995 (Thermoplastic-insulated underground feeder and branch-circuit cables )
UL 5-1996 (Surface metal raceways and fittings )
UL 568-2002 (Non-metallic cable tray systems )
UL 5A-2003 (Nonmetallic surface raceways and fittings )
UL 5C-1998 (Surface raceways and fittings for use with data, signal, and control circuits )
UL 719-2002 (Nonmetallic-sheathed cables )
UL 814-2004 (Gas-tube-sign and ignition cable )
UL 83-2003 (Thermoplastic-insulated wires and cables )
UL 854-1999 (Service-entrance cables )